Cleaning The Edge-Cleaning Side Rotating Brush - Samsung SR8895 Instrukcja Obs?Ugi

Maintain tools and fi lter
CLEANING THE ROBOTIC VACUUM CLEANER

CLEANING THE EDGE-CLEANING SIDE ROTATING BRUSH

You must turn off the Power Switch at the bottom of the
main unit before cleaning the robotic vacuum.
1. Check whether the side rotating brush is bent or
whether there are any foreign substances stuck on
the brush.
2. Wearing rubber gloves, wrap the side rotating brush
with a cloth using hot water for about 10 seconds
and wipe it on the cloth.
3. Turning the side rotating brush, repeat the
procedures in Step 2.
4. If hair or string is wrapped between the main unit
and the side rotating brush, undo the screw of the
side rotating brush using a (+) driver to remove it.
When reassembling the brush, check the "L" mark
on the edge-cleaning side rotating brush and the
"L" mark on the main unit and then reassemble the
side rotating brush.
( Letter "R" is carved at the right side rotating
brush.)
Because the side rotating brush easily attracts hair and other foreign substances,
make sure to clean it frequently.
NOTE
Excessive foreign substances on the side rotating brush can damage the brush.
Maintain tools and fi lter _41