Samsung SR8895 Instrukcja Obs?Ugi page 232

Maintain tools and fi lter
CLEANING THE ROBOTIC VACUUM CLEANER
3. Lift the power brush up from the main unit.
4. Remove any foreign substances such as long hairs or
strings wrapped around the power brush using a cleaning
brush or a vacuum cleaner.
5. When cleaning is complete, fi x the Power Switch side of
the power brush fi rst and then fi x the other side of the
brush in the same way.
6. After inserting the 3 tips at the top of the cover, push
the other end in until it "clicks" into place.
●
To prevent the robotic vacuum cleaner from becoming clogged, be careful not to
vacuum tooth picks or cotton swabs.
CAUTION
●
When removing foreign substances becomes diffi cult, contact a customer care center.
●
Because the power brush vacuums the dust on the fl oor, long strings or hair can
become wrapped around the brush. Check and clean the power brush regularly.
40_ Maintain tools and fi lter