Auto Cleaning - Samsung SR8930 User Manual

Auto Cleaning

The vacuum cleaning robot will move by itself and automatically
clean the house until cleaning is completed once.
■
If you press the Start/Stop button on the main unit or remote control
without selecting a cleaning mode, an automatic cleaning run starts.
■
If cleaning begins when the vacuum cleaning robot is docked with the
charger station, the time to return to the charger is decreased since the
vacuum cleaning robot remembers its original position while moving.
■
If the vacuum cleaning robot starts the current cleaning run at a location
other than the charging station and fails to locate the charging station
while cleaning, it will stop near the location where it started cleaning.
■
If the battery level becomes too low while cleaning, the vacuum cleaning robot will automatically
return to the charger station and resume cleaning after charging its battery. (Number of cleaning
operations resumed : Once)
Main unit button
▶
1time 1time
About the Resume Cleaning function
• If the vacuum cleaning robot has evaluated that cleaning is
complete, the resume cleaning function is not performed.
NOTE
• If you move the vacuum cleaning robot when it is being
charged or press a button, the vacuum cleaning robot
judges cleaning to be complete and does not resume
cleaning.
• Do not move the vacuum cleaning robot when it is cleaning
or press a button while it is cleaning. Otherwise, the
CAUTION
vacuum cleaning robot judges cleaning to be complete and
starts cleaning again from the beginning.
• Each time you press the Turbo button, the Turbo icon on
the display panel is turned on or off sequentially. When the
Turbo icon is turned on, you can start cleaning in Turbo
mode.
28_ operating
Remote control
button
1.
2.
Confi guration
Sequence
Set the mode.
Cancel the mode.
Normal Mode Normal Mode
Turbo Mode Turbo Mode
Cleaning Complete Cleaning Complete