Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER
MANUAL CLEANING
You can move the robotic vacuum cleaner to clean a
particular location directly by using the remote control.
Move the robotic vacuum cleaner to the location where you want
to perform manual cleaning.
You can manually clean using the remote control only.
Main unit button
4time
●
When the robotic vacuum cleaner is docked with the
charger station, manual cleaning is not supported.
NOTE
●
When you press the Turbo remote control button, either On
turbo (
CAUTION
the display panel in turns. When On turbo is displayed, you
can clean the fl oor in Turbo Mode.
●
When you press the Edge remote control button, On Edge
(
display panel in turns. When On Edge is displayed, you can
clean the fl oor in Edge Mode.
●
If you select both Turbo Mode and Edge Mode at the same
time, the (
turns.
Remote control button
) or Off turbo (
) or Off Edge (
) is display on the display panel in
Directional Buttons (Forwards, Left, Right)
A backwards function is not supported.
Configuration Sequence
1
Set the mode.
2
Cancel the mode.
) is displayed on
) is displayed on the
Operating the cleaner _33
Normal Mode
Turbo Mode
Edge Mode