Table of Contents
Advertisement
A Fully Automatic Shooting (Scene Intelligent Auto)
<A> is a fully automatic mode. The camera analyzes the scene
and sets the optimum settings automatically.
With Scene Intelligent Auto, the camera always focuses automatically.
You can select one of three AF methods with the menu or Quick Control
screen.
When you select [u (face)+Tracking], the person's face will be
detected and focused (p.118). [FlexiZone - Multi] makes it easier to
focus a moving subject (p.120). [FlexiZone - Single] uses only one AF
point to focus the desired target subject (p.121).
Using [u (face)+Tracking] is explained below.
AF point
66
Set the Mode Dial to <A>.
1
Check the AF point.
2
When a face is detected, the <p> AF
point will appear over the face to be
focused.
You can also tap the screen to select
the face or subject. If the subject is
not a face, <
If no faces are detected or if you tap
the screen but do not select any face
or subject, the camera will switch to
[FlexiZone - Multi] for automatic
selection (p.120).
> will be displayed.
Advertisement
Table of Contents
