Table of Contents
Advertisement
When shooting, note the following:
Image Quality
When you shoot at high ISO speeds, noise (such as dots of light and
banding) may become noticeable.
Shooting in high temperatures may cause noise and irregular colors in the image.
If you shoot continuously for a long period, the camera's internal
temperature may rise, and image quality may deteriorate. When you are
not shooting, turn off the camera.
If you shoot a long exposure while the camera's internal temperature is
high, image quality may deteriorate. Stop shooting and wait a few
minutes before shooting again.
Internal Temperature Warning <s> (in white) or <E> (in red)
After prolonged shooting or when shooting under a high ambient
temperature, the camera's internal temperature will increase and the white
<s> icon or red <E> icon will appear in white or red on the screen.
The white <s> icon indicates degraded still photo quality. It is
recommended to temporarily stop shooting still photos until the camera's
internal temperature decreases.
The red <E> icon indicates that the power will soon turn off automatically. If
this happens, you will not be able to shoot again until the camera's internal
temperature decreases. Turn off the power and let the camera rest for a while.
Shooting for prolonged periods under high ambient temperatures will
cause the <s> icon or <E> icon to appear earlier. When you are not
shooting, turn off the camera.
Shooting high ISO speed images or long exposures while the camera's
internal temperature is high, may result in degraded image quality even if
the white <s> icon does not appear on the screen.
Shooting Result
If you take the picture in magnified view, the exposure may not come out as
desired. Return to the normal view before taking the picture. (During the
magnified view, the shutter speed and aperture turn orange.) Even if you take
the picture in magnified view, the image will be captured in the normal view.
If [A3: Auto Lighting Optimizer] (p.159) is not set to [Disable], the
image may look bright even if a decreased exposure compensation or
decreased flash exposure compensation is set.
If you use a TS-E lens (other than the TS-E17mm f/4L or TS-E24mm
f/3.5L II) and shift or tilt the lens or use an Extension Tube, the standard
exposure may not be obtained or an irregular exposure may result.
128
Advertisement
Table of Contents
