Table of Contents
Advertisement
wPrinting
e Adjustment of Printing Effects
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change
the histogram's distribution and adjust the
image's brightness and contrast.
With the Adjust levels screen displayed, press
the <B> button to change the position of
the <
>. Press the <YA>/<ZO> button to
h
change the shadow level (0-127) or highlight level (128-255).
kBrightener
Effective in backlit conditions that can make the subject's face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective for images shot using flash, where the subject has red eye.
When [On] is set, the red eye will be corrected for printing.
The [
Brightener] and [Red-eye corr.] effects will not be reflected on
k
the screen.
When you select [Detail set.], you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], change the values: B is for blue, A for amber, M for magenta,
and G for green. The image's color balance will be corrected towards the
selected color.
If you select [Clear all], all the printing effect settings will be reverted to
their defaults.
272
In step 4 on page 270, select the printing
effect. When the <ze> icon is
displayed brightly, you can press the
<B> button. You can then adjust the
printing effect. What can be adjusted or
what is displayed will depend on the
selection made in step 4.
Advertisement
Table of Contents
