Table of Contents
Advertisement
Lens Peripheral Illumination / Chromatic Aberration Correction
3
Peripheral light fall-off is a phenomenon that makes the image corners
look darker due to the lens characteristics. Color fringing along subject
outlines is another chromatic aberration. Both lens aberrations can be
corrected. RAW images can be corrected with Digital Photo
Professional (provided software, p.340).
Peripheral Illumination Correction
Depending on shooting conditions, noise may appear on the image periphery.
The correction amount applied will be slightly lower than the maximum
correction amount that can be set with Digital Photo Professional
(provided software).
The higher the ISO speed, the lower the correction amount will be.
Select [Lens aberration
1
correction].
Under the [A2] tab, select [Lens
aberration correction], then press
<Q/0>.
Select the setting.
2
Check that [Correction data
available] is displayed for the
attached lens.
Select [Peripheral illumin.], then
press <Q/0>.
Select [Enable], then press <Q/
0>.
If [Correction data not available] is
displayed, see "About the Lens
Correction Data" on page 165.
Take the picture.
3
The image will be recorded with the
peripheral illumination corrected.
163
Advertisement
Table of Contents
