Table of Contents
Advertisement
Shooting Tips
To freeze the motion of a fast-moving subject
Use a fast shutter speed such as 1/4000 sec. to 1/500 sec.
To blur a running child or animal and convey an impression of
motion
Use a medium shutter speed such as 1/250 sec. to 1/30 sec. While
following the moving subject, press the shutter button to take the picture.
If you use a telephoto lens, hold it steady to prevent camera shake.
To blur a flowing river or fountain
Use a slow shutter speed of 1/30 sec. or slower. Use a tripod to
prevent hand-held camera shake.
Set the shutter speed so that the aperture display does not blink.
If you press the shutter button halfway and change
the shutter speed while the aperture is displayed,
the aperture display will also change to maintain the
same exposure (amount of light reaching the image
sensor). If you exceed the adjustable aperture
range, the aperture display will blink to indicate that
the standard exposure cannot be obtained.
If the exposure will be too dark, the maximum aperture (smallest
number) will blink. If this happens, tap to display the setting screen
and then tap [Y] (or turn the <5> dial to the left) to set a slower
shutter speed or increase the ISO speed.
If the exposure will be too bright, the minimum aperture (highest
number) will blink. If this happens, tap to display the setting screen
and then tap [Z] (or turn the <5> dial to the right) to set a faster
shutter speed or decrease the ISO speed.
Using Speedlite 90EX
To obtain a correct flash exposure of the subject, the flash output will be
set automatically (autoflash exposure) to match the automatically-set
aperture. The shutter speed can be set from 1/200 sec. to 30 sec.
s: Convey the Subject's Movement
143
Advertisement
Table of Contents
