Page 1 INSTRUCTION MANUAL...
Page 2: Introduction
After shooting, play images back and check whether they have been properly recorded. If the camera or memory card is faulty and the images cannot be recorded or downloaded to a computer, Canon cannot be held liable for any loss or inconvenience caused.
Page 3: Item Check List
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Battery Pack Battery Charger Camera LP-E12 LC-E12/LC-E12E* (with body cap) (with protective cover) Neck Strap Interface Cable EM-100DB EOS DIGITAL Instruction Manual...
Page 4: Conventions Used In This Manual
Conventions Used in this Manual Icons in this Manual <5> : Indicates the Main Dial to be turned. <Wj/i>/<XL>/<YA>/<ZO> : Indicates the Main Dial buttons on the top, bottom, left, or right to be pressed. <Q/0> : Indicates the Main Dial to be pressed at the center.
Page 5: Chapters
Chapters For first-time digital camera users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures. Introduction Getting Started Scene Intelligent Auto + Basic Zone Modes and Image Playback Creative Shooting Advanced Shooting Shooting Movies Handy Features Image Playback Post-Processing Images During Playback Printing Images Customizing the Camera...
Page 6: Contents At A Glance
Contents at a Glance Shooting Shoot automatically p.65-87 (Basic Zone modes) Blur the background p.75 (C Creative Auto) Keep the background in sharp focus Shoot continuously p.133 (i Continuous shooting) Take a picture of yourself in a group p.136 (j Self-timer) Freeze the action p.142 (s Shutter-priority AE)
Page 7 Make a large-size print of the picture p.105 (73, 83, 1) Take many pictures p.105 (7a, 8a, b, c) Focusing Change the point of focus p.116 (AF point selection) Shoot a moving subject p.81, 131 (Servo AF) Playback View the images on the camera p.98 (x Playback) Search for pictures quickly...
Page 8: Table Of Contents
Index to Features Power Image Quality Battery Image-recording quality p.105 • Charging p.32 Picture Style p.114 • Installing/Removing p.34 White balance p.172 • Battery check p.39 Color space p.176 Power outlet p.290 Image enhancement features Power saving p.38 • Auto Lighting Optimizer p.159 •...
Page 9 Index to Features Playback Metering mode p.151 Remote control p.291 Image review time p.205 Quick Control p.50 Single-image display p.98 Creative filters p.94 Shooting information display p.256 Exposure Adjustment Index display p.231 Exposure compensation p.153 Image browsing p.155 (Jump display) p.232 AE lock p.157...
Page 10 Contents Introduction Item Check List................. 3 Conventions Used in this Manual ............. 4 Chapters................... 5 Contents at a Glance................ 6 Index to Features ................8 Handling Precautions ..............16 Quick Start Guide ................20 Nomenclature ................. 22 Getting Started Charging the Battery ..............32 Installing and Removing the Battery and Card.......
Page 11 Contents Scene Intelligent Auto + Basic Zone Modes and Image Playback A Fully Automatic Shooting (Scene Intelligent Auto) ....66 A Full Auto Techniques (Scene Intelligent Auto) ......71 Select a Shooting Mode..............74 C Creative Auto Shooting............. 75 2 Shooting Portraits (Portrait) ............78 3 Shooting Landscapes (Landscape) ..........
Page 12 Contents f: Changing the Autofocus Operation ........130 i Continuous Shooting .............. 133 j Using the Self-timer..............136 D Using a Flash................138 Advanced Shooting s: Convey the Subject’s Movement .......... 142 f: Changing the Depth of Field ..........144 a: Manual Exposure ..............
Page 13 Contents Setting the Movie-recording Size ..........187 Shooting Video Snapshots............189 Movie Menu Function Settings............197 Handy Features Handy Features ................204 Disabling the Beeper ..............204 Card Reminder ................204 Setting the Image Review Time ..........205 Displaying the Grid ..............205 Setting Power-saving Features (LCD auto off, Camera auto off) ..........
Page 14 Contents k Enjoying Movies ..............237 k Playing Movies ............... 239 X Editing a Movie’s First and Last Scenes ......... 241 Slide Show (Auto Playback) ............243 Viewing the Images on TV ............247 K Protecting Images..............252 L Erasing Images................ 254 B: Shooting Information Display ..........
Page 15 Contents Reference Using a Household Power Outlet..........290 Remote Control Shooting.............. 291 External Speedlites ............... 292 Using Eye-Fi Cards............... 294 Function Availability Table According to Shooting Mode ....296 System Map .................. 298 Menu Settings ................300 Troubleshooting Guide..............311 Error Codes...................
Page 16: Handling Precautions
The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Page 17 If you have not used the camera for some time or if there is an important shoot coming up, have the camera checked by your Canon dealer or check the camera yourself and make sure it is working properly.
Page 18: Lcd Monitor
Handling Precautions LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there may be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period with the same screen displayed, screen burn-in may occur where you see remnants of what was displayed.
Page 19: About The Lens Mount
If visible spots still remain after the automatic sensor cleaning, having the sensor cleaned by a Canon Service Center is recommended. About the lens mount Periodically cleaning the camera’s body and lens mount with a soft lens cleaning...
Page 20: Quick Start Guide
Quick Start Guide Insert the battery (p.34) Charging the battery: p.32 Insert a card (p.34) With the card’s label facing toward the front of the camera, insert it into the card slot. Attach the lens (p.44) Align the lens’ index with the camera’s index.
Page 21 Quick Start Guide Focus the subject (p.49) Aim the LCD monitor’s center over the subject. Press the shutter button halfway, and the camera will focus the subject. Take the picture (p.49) Press the shutter button completely to take the picture. Review the picture (p.205) The captured image will be...
Page 22: Nomenclature
Nomenclature The names in bold indicate the parts mentioned up until the “Scene Intelligent Auto + Basic Zone Modes and Image Playback” section. Speaker (p.239) <V> Focal plane mark (p.80) Power button (p.37) Flash-sync contacts Shutter button Hot shoe (p.292) (p.49) Microphone (p.178) Mode Dial...
Page 23 Nomenclature LCD monitor/Touch screen (p.54, 59, 207/61, 230, 240) Power/Access lamp (p.36) <M> Menu button (p.54) <o> Movie Start/Stop button (p.178) <x> Playback button (p.98) <Q/0> Quick Control/ Setting button (p.50, 88, 186, 236/54) Info button (p.50, 59, 70, 98, 182) DC Coupler terminal cover (p.290) Tripod socket...
Page 24: Drive Mode
Nomenclature Screen Display (in Creative Zone modes, p.25) Number of possible shots Maximum burst Number of possible shots Battery check (p.39) during WB bracketing zxcn Self-timer countdown e High-speed sync (FP flash) d FE lock/FEB in-progress Creative filters (p.94) Eye-Fi transmission status* (p.294) Shooting mode Picture Style (p.114)
Page 25 Nomenclature Mode Dial Switches to <A> Scene Intelligent Auto, <z> Still Photos, or <k> Movies. Shoot still photos with <A> or <z>, or shoot movies with <k>. <A> Scene Intelligent Auto enables you to just press the shutter button to take a picture with the camera taking care of everything to suit the subject or scene.
Page 26 Nomenclature Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene. C : Creative Auto (p.75) : Portrait (p.78) 3 : Landscape (p.79) : Close-up (p.80) 5 : Sports (p.81) : Night Portrait (p.83) : Handheld Night Scene (p.85) G : HDR Backlight Control (p.86)
Page 27 Nomenclature Lens EF-M Lens (Lens with no focus mode switch and no Image Stabilizer switch.) Focusing ring (p.117, 126) Zoom ring (p.45) Hood mount Zoom position index (p.45) Filter thread (front of lens) Contacts (p.19) Lens mount index (p.44)
Page 28 Nomenclature EF or EF-S Lens (Lens with focus mode switch and Image Stabilizer switch.) * To attach an EF or EF-S lens to the camera, Mount Adapter EF-EOS M is required. Hood mount Zoom position index (p.45) Distance scale Filter thread (front of lens) Zoom ring (p.45)
Page 29 Nomenclature Battery Charger LC-E12 Charger for Battery Pack LP-E12 (p.32). Power plug Charge lamp Full-charge lamp Battery pack slot IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
Page 31: Getting Started
This camera was designed so you can truly enjoy taking photos and capturing the feeling, the essence of a moment in your photos. Photographs are fun and wonderful! Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Strap Fit the strap’s metallic ring over the camera’s strap mount.
Page 32: Charging The Battery
Charging the Battery Remove the protective cover. Attach the battery. Align the battery’s mark with the battery charger’s mark. To detach the battery, follow the above procedure in reverse. Recharge the battery. LC-E12 For LC-E12 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Page 33 3 sec. Do not charge any battery other than a Battery Pack LP-E12. Battery Pack LP-E12 is dedicated to Canon products only. Using it with an incompatible battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.
Page 34: Installing And Removing The Battery And Card
Open the cover. Slide the lever as shown by the arrows and open the cover. Insert the battery. The battery’s “Canon” logo must be toward the camera’s front side as you insert the battery with the battery contacts in first.
Page 35: Remove The Battery
Installing and Removing the Battery and Card Close the cover. Press the cover until it snaps shut. When you set the power to <1>, the number of possible shots (p.39) will be displayed on the LCD monitor. Possible shots Removing the Battery and Card Set the power to <2>.
Page 36 Installing and Removing the Battery and Card Close the cover. Press the cover until it snaps shut. After opening the card/battery compartment cover, be careful not to swing it back further. Otherwise, the hinge may break. When the Power/access lamp is blinking in orange, it indicates that images are being written to or read by the card, being erased, or data is being transferred.
Page 37: Turning On The Power
Turning on the Power If you set the power to <1> and the time zone/date/time setting screen appears, see page 40 to set the time zone and date/time. Pressing the power button toggles between <1> and <2>. With the power <2>, holding down the <x>...
Page 38: Power Saving
Turning on the Power 3 Power-saving Features To save power, the LCD monitor turns off automatically if you do not operate the camera. If you continue to not operate the camera, the power will turn off automatically. While the LCD monitor is off, pressing any camera button or tapping the LCD monitor will turn it on again.
Page 39: Checking The Battery Level
Turning on the Power z Checking the Battery Level When the power is turned on, the battery level will be indicated in one of four levels. z : Battery level is sufficient. x : Battery level is low, but the camera can still be used.
Page 40: Setting The Time Zone, Date And Time
Setting the Time Zone, Date and Time When you turn on the camera for the first time, the Time zone and Date/ Time setting screen will appear. First set the time zone, then set the date and time. Note that the shooting date/time appended to the captured images will be based on this date/time setting.
Page 41: Set The Date And Time
3 Setting the Time Zone, Date and Time The menu setting procedure is explained on pages 54-56. The time displayed on the lower right is the time difference compared with Coordinated Universal Time (UTC). If you do not see your time zone, set the time zone while referring to the difference with UTC.
Page 42 3 Setting the Time Zone, Date and Time Set the daylight saving time. Set it if necessary. On the Main Dial, press the <YA>/ <ZO> button to select [Y]. Press <Q/0> so <a> is displayed. On the Main Dial, press the <Wj/ i>/<XL>...
Page 43: Selecting The Interface Language
Selecting the Interface Language Display the menu screen. Press the <M> button. Under the [52] tab, select [LanguageK]. On the Main Dial, press the <YA>/ <ZO> button to select the [52] tab. On the Main Dial, press the <Wj/ i>/<XL> button to select ] (the fifth from the [Language top), then press <Q/0>.
Page 44: Attaching And Detaching A Lens
Attaching and Detaching a Lens The camera can use EF-M, EF, and EF-S lenses. To attach an EF or EF-S lens to the camera, Mount Adapter EF-EOS M is required. Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
Page 45: Zoom
Attaching and Detaching a Lens Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. About Zooming To zoom, turn the zoom ring on the lens with your fingers.
Page 46: About The Lens Image Stabilizer
About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a sharper shot. * IS stands for Image Stabilizer. With an EF-M Lens (Operated with a Menu) Set it with the menu*. By default, it is set to [Enable]. Display the menu screen.
Page 47: Take The Picture
About the Lens Image Stabilizer With Lenses other than EF-M (Equipped with a Switch) Use the IS switch on the lens. Set the STABILIZER switch to <1>. Using the Image Stabilizer when Shooting Press the shutter button halfway. The Image Stabilizer will operate. Take the picture.
Page 48: Basic Operation
Basic Operation Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting Vertical shooting 1. Wrap your right hand around the camera grip firmly. 2. Hold the lens bottom with your left hand. 3.
Page 49: Shutter Button
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway The camera will focus and adjust the exposure automatically (shutter speed and aperture set automatically). The exposure setting (shutter speed and aperture) is displayed (8).
Page 50: Quick Control
Quick Control You can directly select and set the shooting functions displayed on the LCD monitor. This is called the Quick Control screen. There are two types of Quick Control screens: Q Quick Control and Quick Control. Q Quick Control Tap [Q] on the screen or press <Q/ >.
Page 51 Quick Control Scene Intelligent Auto B Quick Control Q Quick Control Basic Zone modes Creative Zone modes Take the picture. Press the shutter button completely to take the picture. Functions that can be set in the Scene Intelligent Auto and Basic Zone modes are on page 88.
Page 52 Quick Control Functions that can be set with Quick Control AF method (p.116) White balance (p.172) AF operation (p.130) Image-recording Picture Style (p.114) quality (p.105) Creative filters (p.260) Auto Lighting Optimizer (p.159) Metering mode (p.151) Shutter speed (p.142) Aperture (p.144) Shooting mode Highlight tone priority (p.285) (p.25, 26)
Page 53 Quick Control Function Setting Screen <Q/0> <Q/0>...
Page 54: Menu Operations
Menu Operations You can set various settings with the menus such as the image- recording quality, date/time, etc. Operate the menus with the <M> button, Main Dial, and <Q/ > button. <M> button <Q/0> LCD monitor Main Dial Menu Screen The menu applicable to the current shooting mode is provided.
Page 55: Movie Shooting
3 Menu Operations Creative Zone modes Playback Set-up My Menu Shooting Menu items Menu settings Movie shooting...
Page 56 3 Menu Operations Menu Setting Procedure Display the menu screen. Press the <M> button. Select a tab. Press the <YA>/<ZO> button to select a tab. For example, the [A3] tab refers to the screen displayed when the A (Shooting) tab’s third icon [ ] from the left is selected.
Page 57: Formatting The Card
Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
Page 58 3 Formatting the Card Execute [Format card] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card error is displayed (p.323). What is low-level formatting? Perform low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase all data in the card.
Page 59: Switching The Lcd Monitor Display
Switching the LCD Monitor Display B Quick Control Each time you press the button, the LCD monitor switches between the Live View screen and B Quick Control (p.50). Menu Captured Image Appears when you press the Appears when you press the <M>...
Page 60: Feature Guide
Feature Guide The Feature guide is a simple description of the respective shooting mode, function, or option. It is displayed when you change the shooting mode or use the Quick Control screen during still photo shooting, movie shooting, or playback. When you select a function or option on the Quick Control screen, the Feature guide description is displayed.
Page 61: Using The Touch Screen And Main Dial
d Using the Touch Screen and Main Dial The LCD monitor is a touch-sensitive panel that you can operate with your fingers. Also, on the camera back, you can turn the Main Dial to make a selection and press the dial’s top, bottom, left, right, or center. You can operate this camera by touching the LCD monitor or using the Main Dial (turning it or pressing the top, bottom, left, or right) to select an item, then pressing the Main Dial’s center button to set it.
Page 62 d Using the Touch Screen and Main Dial Drag Menu screen (Sample display) Slide your finger while touching the LCD monitor. Scale display (Sample display) Operations possible by dragging your finger on the screen Selecting a menu tab or item after pressing the <M> button Setting a scale control Quick Control Playback operations (swipe)
Page 63 d Using the Touch Screen and Main Dial 3 Silencing the Beep during Touch Operations If [53: Beep] is set to [Touch to ] or [Disable], the beep will not sound during touch operations. 3 Set the Touch Control Select [Touch control]. Under the [53] tab, select [Touch control], then press <Q/0>.
Page 64: Main Dial
d Using the Touch Screen and Main Dial Main Dial To select a function, you can turn the dial or press the top, bottom, left, and right edges. By pressing <Q/0> at the center, you can set the selected function.
Page 65: Scene Intelligent Auto
Through the lens of a camera, you may discover things you’ve never noticed before. Try wearing casual clothing so you can rest on one knee or crouch if necessary. Walk around with a camera in hand and observe your surroundings so you can discover new subjects you may find interesting.
Page 66: A Fully Automatic Shooting (Scene Intelligent Auto)
A Fully Automatic Shooting (Scene Intelligent Auto) <A> is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. With Scene Intelligent Auto, the camera always focuses automatically. You can select one of three AF methods with the menu or Quick Control screen.
Page 67 A Fully Automatic Shooting (Scene Intelligent Auto) Focus the subject. Press the shutter button halfway to focus. When focus is achieved, the AF point will turn green and the beeper will sound. Take the picture. Press the shutter button completely. The captured image will be displayed for approx.
Page 68 A Fully Automatic Shooting (Scene Intelligent Auto) The AF point does not turn green and focus is not achieved. Try again, aiming the AF point at an area with a good bright/dark contrast, then press the shutter button halfway. Also, focus might not be achieved if you are too close to the subject.
Page 69 A Fully Automatic Shooting (Scene Intelligent Auto) With Speedlite 90EX Attached (p.138) (When you use flash, there is a slight time lag after you press the shutter button completely before the picture is taken.) The flash fired even though it was daylight. For a backlit subject, the flash may fire to help lighten the subject’s dark areas.
Page 70: Battery Check
A Fully Automatic Shooting (Scene Intelligent Auto) Display Screen During Shooting Each time you press the button, the information display will change. AF method • c : u+Tracking • o : FlexiZone - Multi • d : FlexiZone - Single Possible shots Battery check Shooting mode...
Page 71: A Full Auto Techniques (Scene Intelligent Auto)
A Full Auto Techniques (Scene Intelligent Auto) With a digital camera, you should use a card with ample capacity. If you cannot decide on the composition or which mode to use, you should shoot freely in various compositions and modes. Even if the picture is slightly blurred, it can still convey something.
Page 72: Scene Icons
A Full Auto Techniques (Scene Intelligent Auto) Scene Icons When you shoot in the <A> mode, an icon representing the scene detected by the camera will be displayed. Subject Portrait Non-Portrait Background Nature and Color Movement Outdoor Movement Close Background Scene Bright Gray...
Page 73 A Full Auto Techniques (Scene Intelligent Auto) *5 : Displayed with any of the lenses below: • EF24mm f/2.8 IS USM • EF28mm f/2.8 IS USM • EF300mm f/2.8L IS II USM • EF400mm f/2.8L IS II USM • EF500mm f/4L IS II USM •...
Page 74: Select A Shooting Mode
Select a Shooting Mode Tap the shooting mode icon on the screen’s upper left corner. The shooting mode selection screen will appear. Tap the screen to select a shooting mode. You can also select the shooting mode on the B Quick Control screen.
Page 75: C Creative Auto Shooting
C Creative Auto Shooting In the <C> mode, you can easily blur the background, change the drive mode or control the firing of an attached Speedlite flash. You can also choose the ambience you want to convey in your images. The default settings are the same as the <A>...
Page 76 C Creative Auto Shooting Battery check Possible shots Image-recording quality (1) Ambience-based shots (Q Quick Control / B Quick Control) You can choose the ambience you want to convey in your images.
Page 77 C Creative Auto Shooting (2) Blurring/Sharpening the background (Q Quick Control / B Quick Control) If you move the index mark toward the left, the background will look more blurred. If you move it toward the right, the background will look more in focus.
Page 78: Shooting Portraits (Portrait)
2 Shooting Portraits (Portrait) This mode blurs the background to make the person stand out better. It also makes skin tones and the hair look softer. Shooting Tips The further the distance between the subject and background, the better. The further the distance between the subject and background, the more blurred the background will look.
Page 79: Shooting Landscapes (Landscape)
3 Shooting Landscapes (Landscape) Suited for wide scenes when you want everything to be in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end.
Page 80: Shooting Close-Ups (Close-Up)
4 Shooting Close-ups (Close-up) For shooting flowers and small objects up close. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. When the background has no other flowers, leaves, etc., the close- up subject will stand out more.
Page 81: Shooting Moving Subjects (Sports)
5 Shooting Moving Subjects (Sports) Use this mode to photograph a moving subject. Shooting Tips Shoot continuously. When you press the shutter button halfway, the camera will focus and the AF point will be fixed. While the camera focuses, the beeper will sound. If focus cannot be achieved, the AF point will turn orange.
Page 82 5 Shooting Moving Subjects (Sports) Under low light, when camera shake is prone to occur, the LCD monitor’s shutter speed display on the bottom left will blink. Hold the camera steady and shoot.
Page 83: Shooting Night Portraits (Night Portrait) (With A Tripod)
6 Shooting Night Portraits (Night Portrait) (With a Tripod) Attach Speedlite 90EX and shoot portraits with a beautiful and bright night scene in the background. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view.
Page 84 6 Shooting Night Portraits (Night Portrait) (With a Tripod) Tell the subject to keep still even after the flash fires. If you use a flash with the self-timer, the self-timer/AF-assist beam lamp will light up briefly after the picture is taken. When shooting night scenes or other scenes where multiple point-like light sources appear on the screen, the camera may not be able to focus automatically.
Page 85: F Shooting Night Scenes Handheld (Handheld Night Scene)
F Shooting Night Scenes Handheld (Handheld Night Scene) For shooting night scenes while handholding the camera. When you take a picture, four shots are taken continuously to produce a single, bright photo that reduces camera shake. Shooting Tips Hold the camera firmly. While shooting, hold the camera firmly and steadily.
Page 86: G Shooting Backlit Scenes (Hdr Backlight Control)
G Shooting Backlit Scenes (HDR Backlight Control) When shooting a scene having both bright and dark areas. When you take a picture, three continuous shots will be taken at different exposures. The loss of detail in highlights and shadows will be reduced in the final image.
Page 87 Cautions for <F> When shooting night scenes and other scenes with multiple point-like light sources, the camera may not be able to focus automatically. In such cases, set the focus mode to [MF] and focus manually. When shooting flash photography, if the flash fires and the subject’s background is close enough to be illuminated by the flash or the night scene has only few lights, the shots may not align correctly.
Page 88: Q Quick Control For Basic Zone And Scene Intelligent Auto
Q Quick Control for Basic Zone and Scene Intelligent Auto Example: Portrait mode Quick Control Functions Quick Control B: B Quick Control o: Default setting Function (p.66) (p.75) (p.78) (p.79) (p.80) (p.81) (p.83) (p.85) (p.86) u: Single shooting i: Continuous Drive shooting (p.133) mode...
Page 89: Shoot By Ambience Selection
Shoot by Ambience Selection Except in the <G> Basic Zone mode, you can select the ambience for shooting. Ambience Ambience Effect C 2 3 4 5 6 Standard setting No setting Vivid Low / Standard / Strong Soft Low / Standard / Strong Warm Low / Standard / Strong Intense...
Page 90 Shoot by Ambience Selection Set the ambience effect. Tap the item shown in the figure so that [Effect] appears on the bottom of the screen. Tap the effect’s level and setting. Take the picture. Press the shutter button. If you change the shooting mode or set the power to <2>, the setting will revert back to [ Standard...
Page 91 Shoot by Ambience Selection Ambience Settings Standard setting Standard settings for the respective shooting mode. Note that <2> has image characteristics geared for portraits and <3> is geared for landscapes. Each ambience is a modification of the respective shooting mode’s image settings. Vivid Makes the image more vivid and impressive than with [ Standard setting].
Page 92: Shoot By Lighting Or Scene Type
Shoot by Lighting or Scene Type In the <2>, <3>, <4>, and <5> Basic Zone modes, you can shoot while the settings match the lighting or scene type. Normally, [ Default setting] is adequate, but if the settings match the lighting condition or scene, the picture will look more accurate to your eye.
Page 93: Default Setting
Shoot by Lighting or Scene Type When using a flash, the setting will switch to [ Default setting]. (However, the shooting information will display the lighting or scene type that was set.) If you want to set this together with [Ambience-based shots], set the [Light/scene-based shots] that best matches the ambience you have set.
Page 94: Using Creative Filters
k Using Creative Filters Except in the Scene Intelligent Auto, Handheld Night Scene, HDR Backlight Control, and Movie shooting modes, you can apply a Creative filter and check the effect and composition. When you take the picture, only the image applied with the Creative filter will be saved. If you want to also save the image not applied with the Creative filter, use the Creative filter during image playback (p.260).
Page 95 k Using Creative Filters By tapping [ ], you can change the white frame’s horizontal or vertical orientation. Take the picture. Press the shutter button. When you use a Creative Filter and shoot, even if you set the drive mode to continuous shooting (i/q), single shooting will take effect.
Page 96 k Using Creative Filters Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness.
Page 97: Toy Camera Effect
k Using Creative Filters Toy camera effect Gives a color cast typical of toy cameras and darkens the image’s four corners. By adjusting the color tone, you can change the color cast. Miniature effect Creates a diorama effect. You can change where the image looks sharp.
Page 98: Image Playback
x Image Playback The easiest way to play back images is explained below. For more details on the playback procedure, see page 229. Play back the image. Press the <x> button. The last captured image or last image viewed will appear. When the power is <2>...
Page 99 x Image Playback Exit the image playback. Press the <x> button to exit the image playback and return to the Live View screen.
Page 101: Creative Shooting
Once you become more used to taking pictures, try shooting subjects from different angles, or slightly from above or below. Different facial expressions or unusual perspectives can create truly interesting photos. Trying different things before you shoot can also result in a great shot. Creative Shooting With Scene Intelligent Auto and Basic Zone modes, you can easily take pictures, but cannot change the function...
Page 102: D: Program Ae
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. In the Creative Zone, select <d> (p.74) Focus the subject. Aim the AF point over the subject. Then press the shutter button halfway.
Page 103 d: Program AE Shooting Tips Change the ISO speed. Use Speedlite 90EX. To match the subject and ambient lighting level, you can change the ISO speed (p.109) or use Speedlite 90EX (p.138). In the <d> mode, the Speedlite 90EX does not fire automatically. In low-light conditions, turn <ON>...
Page 104 d: Program AE Quick Control In Creative Zone modes, you can set the AF method, AF operation, Drive mode, Image quality, White balance, Creative filters, Picture Style, Auto Lighting Optimizer, Metering mode, etc. For details on metering modes, see page 151.
Page 105: Setting The Image-Recording Quality
* Figures for the file size, number of possible shots, and maximum burst are based on Canon’s 8 GB test card and testing standards (3:2 aspect ratio, ISO 100, and Standard Picture Style). These figures will vary depending on the subject, card brand, aspect ratio, ISO speed, Picture Style, Custom Functions, and other settings.
Page 106: Maximum Burst
3 Setting the Image-Recording Quality I want to select the image-recording quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A2 (59.4x42 cm/23.4x16.5 in.) you want to crop the image, selecting a higher quality (more pixels) such as 73, A3 42x29.7 cm/ 83, 1+73, or 1 is recommended.
Page 107 3 Setting the Image-Recording Quality About 1 1 is the raw image data before it is made into 73 or other images. Although 1 images require software such as Digital Photo Professional (provided, p.340) so that they can be displayed on the computer, they also offer flexibility for image adjustments possible only with 1.
Page 108: Aspect Ratio
3 Setting the Image-Recording Quality Aspect ratio The image’s aspect ratio can be set to [3:2], [4:3], [16:9], or [1:1]. The area surrounding the image on the LCD monitor is masked in black when the following aspect ratios are set: [4:3] [16:9] [1:1]. JPEG images will be saved with the set aspect ratio.
Page 109: I: Changing The Iso Speed
i: Changing the ISO SpeedN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically (p.112). You can set the ISO speed with the following: 1. ISO display on the Live View screen, 2.
Page 110 3 i: Changing the ISO SpeedN Using the Menu Screen Select [ISO speed]. Under the [A3] tab, select [ISO speed], then press <Q/0 >. Set the ISO speed. Press the <YA>/<ZO> button to select the desired ISO speed, then press <Q/0>. With [AUTO] selected, the ISO speed will be set automatically (p.112).
Page 111 3 i: Changing the ISO SpeedN ISO Speed Guide ISO Speed Shooting Situation (No flash) Flash Range 100 - 400 Sunny outdoors The higher the ISO speed, the farther the flash range 400 - 1600 Overcast skies or evening time will extend (p.139).
Page 112: Shooting Mode
3 i: Changing the ISO SpeedN ISO [AUTO] If the ISO speed is set to [AUTO] and you press the shutter button halfway, the current ISO speed will be displayed. As indicated below, the ISO speed will be set automatically to suit the shooting mode.
Page 113 3 i: Changing the ISO SpeedN 3 Setting the Maximum ISO Speed for [ISO Auto]N For ISO Auto, you can set the maximum ISO speed limit within ISO 400 - 6400. Under the [A3] tab, select [ISO Auto], then press <Q/0>. Select the ISO speed, then press <Q/0>.
Page 114: A Selecting The Best Picture Style For The Subject
A Selecting the Best Picture Style for the SubjectN Six Picture Styles are provided to suit your photographic expression or subject. Each one can be fine-tuned. Display the Quick Control screen. With the Q Quick Control screen, you can check the effect while setting the Picture Style.
Page 115 A Selecting the Best Picture Style for the SubjectN Q Portrait For nice skin tones. The image looks softer. Suited for close-up portraits. By changing the [Color tone] (p.168), you can adjust the skin tone. R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes.
Page 116: Changing The Focusing Method
Changing the Focusing Method Scene Intelligent Basic Zone modes, Auto Creative Zone modes Focus mode* Menu (AF only) AF, MF, AF+MF Menu, u+Tracking, FlexiZone - Multi, FlexiZone - AF method Quick Control Single Continuous AF Menu Enable / Disable * “Focus mode” will be displayed when an EF-M lens has been attached. Select the AF method.
Page 117 Changing the Focusing Method Set the lens focus mode to [AF]. With an EF-M lens Under the [A2] tab, select [Focus (operated with a mode]. menu): Select [AF]. For [Focus mode], if you select [AF+MF], you can hold the shutter button pressed halfway after the AF operation and focus manually (MF) with the focusing ring.
Page 118 Changing the Focusing Method u(face)+Tracking: c Human faces are detected and focused. If a face moves, the AF point also moves to track the face. Check the AF point. When a face is detected, the AF point will appear over the face to be focused.
Page 119 Changing the Focusing Method If the focus is far off, face detection will not be possible. If you set [Continuous AF] to [Enable], you can prevent the image from becoming greatly out of focus. An object other than a human face may be detected as a face. Face detection will not work if the face is very small or large in the picture, too bright or too dark, or partially hidden.
Page 120 Changing the Focusing Method FlexiZone - Multi: o Up to 31 AF points (automatically selected) covering a wide area can be used to focus. This wide area can also be divided into 9 zones for focusing (zone selection). Select the AF zone. N Pressing the <XL>...
Page 121 Changing the Focusing Method When the camera does not focus the desired target subject with automatic AF point selection, switch the AF method to zone selection or [FlexiZone - Single], and refocus. Depending on the aspect ratio setting, the number of AF points will differ. At [3:2], there will be 31 AF points.
Page 122 Changing the Focusing Method Notes About [u+Tracking], [FlexiZone - Multi], and [FlexiZone - Single] AF Operation Even when focus has been achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. If the light source changes during autofocusing, the screen may flicker and focusing may be difficult.
Page 123 In the above cases, if the camera cannot focus automatically, focus manually. With some EF lenses (Mount Adapter EF-EOS M required), it may take longer to achieve focus or correct focus may not be achieved. For the latest information, visit your local Canon Web site.
Page 124 Changing the Focusing Method Using Continuous AF The default setting is [Enable]. Since the focus is constantly close to the subject, when you press the shutter button, the camera quickly focuses the subject. If [Enable] is set, the lens will operate frequently and consume more battery power. This will reduce the number of possible shots (battery life).
Page 125: Shooting With The Touch Shutter
x Shooting with the Touch Shutter You can focus and take the picture automatically just by tapping the LCD monitor screen. This works in all shooting modes. Enable the touch shutter. Tap [y] on the screen’s bottom left. Each time you tap the icon, it will toggle between [y] and [x].
Page 126: Mf: Focus Manually
MF: Focus Manually You can magnify the image and focus precisely with manual focus. Set the lens focus mode to [MF]. With an EF-M lens Under the [A2] tab, select [Focus (operated with a mode]. menu): Select [MF]. With an EF or EF-S lens (operated with a switch): Set the lens focus mode switch to...
Page 127 MF: Focus Manually Magnify the image. Each time you tap on [ ] on the screen, the magnified area will change as follows: Magnification 1 x a 5x a 10x a canceled Focus manually. While looking at the magnified image, turn the lens focusing ring to focus.
Page 128 When shooting, note the following: Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image. If you shoot continuously for a long period, the camera’s internal temperature may rise, and image quality may deteriorate.
Page 129 When shooting, note the following: Image on the LCD monitor Under low- or bright-light conditions, the Live View image may not reflect the brightness of the captured image. If the light source within the image changes, the screen may flicker. If this happens, stop shooting and resume shooting under the actual light source.
Page 130: F: Changing The Autofocus Operation
f: Changing the Autofocus OperationN In the <a>, <f>, <s>, and <d> shooting modes, you can select the AF (Autofocus) operation to suit the shooting condition or subject. In Basic Zone modes, the optimum AF operation is set for the respective shooting mode.
Page 131 f: Changing the Autofocus OperationN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound.
Page 132 f: Changing the Autofocus OperationN Depending on the lens used, the distance to the subject and the subject’s speed, the camera may not be able to achieve correct focus. During continuous shooting, the image displayed on the LCD monitor may seem out of focus. If you operate the zoom during continuous shooting, the focus may be lost.
Page 133: Continuous Shooting
i Continuous Shooting You can shoot up to approx. 4.3 shots per second (p.134). This is effective for shooting a child walking toward you or capturing different facial expressions. Press the < j/i> button. You can also select the shooting mode on the B Quick Control screen.
Page 134 i Continuous Shooting Shooting Tips Also set the AF operation (p.130) matching the subject. • For a moving subject When an EF-M lens is being used and [Servo AF] and [AF method] are both set, focusing on a moving subject will be continuous during continuous shooting.
Page 135 i Continuous Shooting Flash can also be used (with Speedlite 90EX attached). Since the flash will require recycling time, the continuous shooting speed will be slower. When the battery level is low, the continuous shooting speed will become slightly slower. The continuous shooting speed may become slower depending on the lens type, shutter speed, aperture, subject conditions, brightness, flash use, etc.
Page 136: Using The Self-Timer
j Using the Self-timer Press the < j/i> button. You can also select the shooting mode on the B Quick Control screen. Tap the self-timer. By tapping [2], you can return to the previous screen. Q: 10-sec. self-timer The remote controller can also be used (p.291).
Page 137 j Using the Self-timer With <q>, the interval between the multiple shots may be prolonged depending on the shooting functions settings such as the image- recording quality or flash. When you use a Creative Filter and shoot, even if you set the drive mode to <q>...
Page 138: D Using A Flash
D Using a Flash In indoors, low light, or backlit conditions in daylight, you can attach a flash unit and just press the shutter button to take nice pictures. In the <d> mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to obtain correct exposure of the subject.
Page 139 D Using a Flash Attach a Speedlite and turn on the Speedlite. The Speedlite’s power lamp will light and recharging will start. Check that the lamp lights. When it lights, you can shoot. In Basic Zone modes (p.26), you will not be able to release the shutter until the <D>...
Page 140 D Using a Flash Camera-Linked Flash Power Off Function When you turn the camera <2> after having shot with a Speedlite 90EX attached to the camera, the Speedlite’s power will also be turned <2>. However, depending on the operation, the Speedlite’s power off may not be correctly linked to the camera’s power off.
Page 141: Advanced Shooting
When you have an idea for an image, you can change the lens and set image effects to match what you want. This is the advantage of interchangeable-lens digital cameras. Having a mini tripod is also convenient for self-timer shots and to prevent camera shake.
Page 142: S: Convey The Subject's Movement
s: Convey the Subject’s Movement You can either freeze the action or create motion blur with the <s> (Shutter-priority AE) mode. * <s> stands for Time value. Blurred motion Frozen action (Slow shutter speed: 1/30 sec.) (Fast shutter speed: 1/2000 sec.) Tap the shooting mode icon on the screen’s upper left corner.
Page 143 s: Convey the Subject’s Movement Shooting Tips To freeze the motion of a fast-moving subject Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. To blur a running child or animal and convey an impression of motion Use a medium shutter speed such as 1/250 sec.
Page 144: F: Changing The Depth Of Field
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, use <f> (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * <f> stands for Aperture value, which is the size of the diaphragm hole inside the lens. Blurred background Sharp foreground and background (With a low aperture f/number: f/5.6)
Page 145 f: Changing the Depth of Field Aperture Display The higher the f/number, the smaller the aperture opening will be. The apertures displayed will differ depending on the lens. If no lens is attached to the camera, “00” will be displayed for the aperture. Shooting Tips When using an aperture with a high f/number or shooting in low light scenes, note that camera shake can occur.
Page 146 f: Changing the Depth of Field If the picture will be too dark, the “30"” (30 sec.) shutter speed display will blink. If this happens, tap to display the setting screen and then tap [Y] (or turn the <5> dial to the left) to set a lower aperture f/number or increase the ISO speed.
Page 147 f: Changing the Depth of Field Depth of Field PreviewN The aperture opening (diaphragm) changes only at the moment when the picture is taken. Otherwise, the aperture remains fully open. Therefore, when you look at the scene on the LCD monitor, the depth of field will look narrow.
Page 148: A: Manual Exposure
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. Set the exposure while referring to the exposure level scale. This method is called manual exposure. * <a> stands for Manual. Tap the shooting mode icon on the screen’s upper left corner.
Page 149 a: Manual Exposure Set the exposure and take the picture. Check the exposure level and set the desired shutter speed and aperture. If the exposure level exceeds ±3 stops, the <I/J> will light up at <-3> or <+3> on the exposure level scale. In [A3: Auto Lighting Optimizer], if the checkmark <X>...
Page 150: Bulb
a: Manual Exposure Using Speedlite 90EX To obtain a correct flash exposure for the main subject, the flash output will be set automatically to match the set aperture (autoflash exposure). You can set the shutter speed from 1/200 sec. to 30 sec. or bulb. BULB: Bulb Exposures A bulb exposure keeps the shutter open for as long as you hold down the shutter...
Page 151: Changing The Metering Mode
q Changing the Metering ModeN Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. Select [Metering mode]. Under the [A3] tab, select [Metering mode], then press <Q/ 0>.
Page 152 3 q Changing the Metering ModeN e Center-weighted average metering The brightness is metered at the image center and then averaged for the entire scene. This metering mode is for advanced users. When One-Shot AF is set: With q, the exposure setting will be locked when you press the shutter button halfway and focus is achieved.
Page 153: Setting Exposure Compensation
Setting Exposure CompensationN O Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes (except <a>). You can set the exposure compensation up to ±3 stops in 1/3-stop increments. You can set exposure compensation on the Live View screen or B Quick Control screen.
Page 154: Flash Exposure Compensation
Setting Exposure CompensationN y Flash Exposure Compensation Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set the exposure compensation up to ±2 stops in 1/3-stop increments. Display the B Quick Control screen.
Page 155: Auto Exposure Bracketing
Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically (up to ±2 stops in 1/3-stop increments) with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Darker exposure Brighter exposure Standard exposure...
Page 156: Canceling Aeb
Auto Exposure BracketingN Take the picture. Press the shutter button completely. The three bracketed shots will be taken in this sequence: standard exposure, decreased exposure, and increased exposure. AEB can also be set with the [A3] tab’s [Expo.comp./AEB]. Canceling AEB Follow steps 1 to 3 to turn off the AEB level display.
Page 157: A Locking The Exposure (Ae Lock)
A Locking the Exposure (AE Lock)N You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <YA> button to lock the exposure, then recompose and take the shot.
Page 158: Af Point Selection
A Locking the Exposure (AE Lock)N AE Lock Effects AF Point Selection Method (p.118-121) Metering Mode (p.151) Automatic Selection Manual Selection AE lock is applied at the AF AE lock is applied at the point that achieved focus. selected AF point. AE lock is applied at the center AF point.
Page 159: Auto Correction Of Brightness And Contrast
Auto Correction of Brightness and ContrastN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is done when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (provided software, p.340).
Page 160: Noise Reduction Settings
Noise Reduction SettingsN High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. At low ISO speeds, the noise in the darker parts of the image (shadow areas) is further reduced.
Page 161: Exposures
3 Noise Reduction SettingsN About [Multi Shot Noise Reduction] The following functions cannot be set: AEB, WB bracketing, [A4: Long exp. noise reduction], 1+73/1. If any of these has already been set, [Multi Shot Noise Reduction] cannot be set. Flash shooting is not possible. You cannot set [Multi Shot Noise Reduction] for bulb exposures.
Page 162 3 Noise Reduction SettingsN Set the setting. Select the desired setting, then press <Q/0>. The setting screen closes and the menu will reappear. [Auto] For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases.
Page 163: Lens Peripheral Illumination / Chromatic Aberration Correction
Lens Peripheral Illumination / Chromatic Aberration Correction Peripheral light fall-off is a phenomenon that makes the image corners look darker due to the lens characteristics. Color fringing along subject outlines is another chromatic aberration. Both lens aberrations can be corrected. RAW images can be corrected with Digital Photo Professional (provided software, p.340).
Page 164: Chromatic Aberration Correction
3 Lens Peripheral Illumination / Chromatic Aberration Correction Chromatic Aberration Correction Select the setting. Check that [Correction data available] is displayed for the attached lens. Select [Chromatic aberration], then press <Q/0>. Select [Enable], then press <Q/ 0>. If [Correction data not available] is displayed, see “About the Lens Correction Data”...
Page 165 Corrections cannot be applied afterwards to JPEG images captured when [Disable] was set. When using a non-Canon lens, setting the corrections to [Disable] is recommended, even if [Correction data available] is displayed. If you use the magnified view during shooting, the peripheral illumination correction and chromatic aberration correction will not be reflected in the image shown on the screen.
Page 166: A Adjusting The Picture Style
Q A Adjusting the Picture StyleN You can customize a Picture Style by adjusting individual parameters such as [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 169. Display the Quick Control screen. Tap [D].
Page 167 Q A Adjusting the Picture StyleN Set the parameter. Tap [Y]/[Z] to set the parameter, then tap [2]. By selecting [zDefault set.] in step 5, you can revert the respective Picture Style to its default parameter settings. To shoot with the Picture Style you modified, follow step 3 on page 114 to select the modified Picture Style and then shoot.
Page 168 Q A Adjusting the Picture StyleN Parameter Settings and Effects Sharpness You can adjust the sharpness of the subject. To make it less sharp, set it toward the E end. The closer it is to E, the softer the image will look. To make it sharper, set it toward the F end.
Page 169 Q A Adjusting the Picture StyleN V Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. kFilter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.
Page 170: A Registering Customized Picture Styles
Q A Registering Customized Picture StylesN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create multiple Picture Styles whose parameter settings such as sharpness and contrast are different.
Page 171 Q A Registering Customized Picture StylesN Select a parameter. Tap the parameter to be set. Set the parameter. Tap [Y]/[Z] to set the parameter, then tap [2]. For details, see “Adjusting the Picture Style” on pages 166-169. The base Picture Style will be indicated under [User Def.*].
Page 172: B: Matching The Light Source
Q B: Matching the Light SourceN The function adjusting the color tone so that white objects look white in the picture is called white balance (WB). Normally, the <Q> (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with <Q>, you can select the white balance that matches the light source or set it manually by shooting a sheet of white paper, etc.
Page 173 Q B: Matching the Light SourceN Select [Custom White Balance]. Under the [A4] tab, select [Custom White Balance], then press <Q/ 0>. The custom white balance selection screen will appear. Import the white balance data. Select the image that was captured in step 1, then press <Q/0>.
Page 174: Adjusting The Color Tone For The Light Source
u Adjusting the Color Tone for the Light SourceN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels.
Page 175: White Balance Auto Bracketing
3 u Adjusting the Color Tone for the Light SourceN White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias.
Page 176: Setting The Color Reproduction Range
Setting the Color Reproduction RangeN The range of reproducible colors is called the color space. With this camera, the color space for captured images can be set to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In Basic Zone modes, sRGB is set. Select [Color space].
Page 177: Shooting Movies
Movies shot with interchangeable-lens digital cameras have a unique look, different from video shot with camcorders. You can manipulate how light enters the camera, shoot wide angle, and enjoy many other video features. Shooting Movies Set the Mode Dial to <k> to shoot movies.
Page 178: Shooting Movies
k Shooting Movies Connecting the camera to a TV set is recommended to play back the movies shot (p.247, 251). Autoexposure Shooting When you select the Movie shooting mode [k], autoexposure is set to adjust the brightness automatically. Set the Mode Dial to <k>. Select [k] (Movie auto exposure) for the shooting mode.
Page 179 k Shooting Movies While shooting a movie, be careful not to cover the microphone with your finger. With certain lenses, focus cannot be achieved with AF. Focus manually instead (p.126). If [Movie Servo AF: Disable] is set, you can focus by pressing the shutter button halfway.
Page 180: Manual Exposure Shooting
k Shooting Movies Manual Exposure Shooting In the [M] shooting mode (Movie manual exposure), you can freely set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. Set the Mode Dial to <k>. Select [M] (Movie manual exposure) for the shooting mode.
Page 181 k Shooting Movies Focus and shoot the movie. The procedure is the same as steps 3 and 4 for “Autoexposure Shooting” (p.178). ISO speed during manual-exposure shooting With [Auto], the ISO speed will be set automatically within ISO 100 - 6400. You can set the ISO speed manually within ISO 100 - 6400 in whole- stop increments.
Page 182 k Shooting Movies Movie Shooting Screen Each time you press the button, the information display will change. AF method • c : u+Tracking • o : FlexiZone - Multi • d : FlexiZone - Single Possible shots (still photos) Movie shooting remaining time/ Elapsed time Movie shooting mode...
Page 183 k Shooting Movies During movie shooting, note the following: If <Q> is set and the ISO speed or aperture changes during movie shooting, the white balance may also change. If you shoot a movie under fluorescent or LED lighting, the movie may flicker.
Page 184 k Shooting Movies Final Image Simulation The final image simulation is a function that allows you to see the effects of the Picture Style, white balance, etc., on the image. During movie shooting, the image displayed will automatically reflect the effects of the settings listed below. Final image simulation for movie shooting Picture Style * All settings such as sharpness, contrast, color saturation, and color tone will...
Page 185 k Shooting Movies The movie and still photo will be recorded as separate files on the card. Functions particular to still photo shooting are shown below. Other functions will be the same as for movie shooting. Function Settings As set in [z1: Image quality]. Image- When the movie recording size is [1920x1080] or [1280x720], Recording...
Page 186: Shooting Function Settings
Shooting Function Settings Function settings particular to movie shooting are explained here. Q Quick Control The following can be set: AF method, image-recording quality (still photos), movie-recording size, video snapshots, white balance, Picture Style, and Auto Lighting Optimizer. The operation procedure is the same as with still photos (p.50).
Page 187: Setting The Movie-Recording Size
Setting the Movie-recording Size The menu option [Z1: Movie rec. size] enables you to select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The 9 (frame rate) switches automatically depending on the [52: Video system] setting.
Page 188 3 Setting the Movie-recording Size Total Movie Recording Time and File Size Per Minute Total Recording Time (approx.) Movie-Recording File Size Size (approx.) 4 GB Card 8 GB Card 16 GB Card [1920x1080] 11 min. 22 min. 44 min. 330 MB/min. [1280x720] 11 min.
Page 189: Shooting Video Snapshots
Shooting Video Snapshots You can easily create a short movie with the video snapshot function. A video snapshot is a short movie clip lasting approx. 2 sec., 4 sec., or 8 sec. A collection of video snapshots is called a video snapshot album and can be saved to the card as a single movie file.
Page 190 3 Shooting Video Snapshots Select [Album settings]. Select [Album settings], then press <Q/0>. If you want to continue shooting for an existing album, go to “Adding to Existing Album” (p.193). Select [Create a new album]. Select [Create a new album], then press <Q/0>.
Page 191 3 Shooting Video Snapshots Creating a Video Snapshot Album Shoot the first video snapshot. Press the <o> (Movie start/stop) button to shoot a movie. The blue bar indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically.
Page 192: Function Description
3 Shooting Video Snapshots Options in Steps 8 and 9 Function Description The movie clip will be saved as the video J Save as album (Step 8) snapshot album’s first video snapshot. The video snapshot just recorded will be added J Add to album (Step 9) to the album recorded immediately before.
Page 193 3 Shooting Video Snapshots Adding to Existing Album Select [Add to existing album]. Follow step 4 on page 190 to select [Add to existing album], then press <Q/0>. Select an existing album. Press the <YA>/<ZO> button to select an album, then press <Q/ 0>.
Page 194 3 Shooting Video Snapshots Cautions for Shooting Video Snapshots You can add to an album only video snapshots with the same duration (approx. 2 sec., 4 sec., or 8 sec. each). Note that if you do any of the following while shooting video snapshots, a new album will be created for subsequent video snapshots.
Page 195 3 Shooting Video Snapshots Editing an Album After shooting, you can rearrange, delete, or play back the video snapshots in the album. On the playback panel, select [X] (Edit). The editing screen will be displayed. Select an editing operation. Tap the icon of the editing operation or press the <YA>/<ZO>...
Page 196: Save The Edited Album
3 Shooting Video Snapshots Save the edited album. Press the <M> button to return to the Editing panel at the screen’s bottom. Tap the [W] (Save) icon or press the <YA>/<ZO> button to select [W] (Save), then press <Q/0>. The save screen will appear. To save it as a new movie, select [New file].
Page 197: Movie Menu Function Settings
Movie Menu Function Settings When you set the Mode Dial to <k>, the [Z1] tab will show functions dedicated to movie shooting. The menu options are as follows. [Z1] menu Movie recording size You can set the image size and frame rate. For details, see pages 187-188.
Page 198 3 Movie Menu Function Settings [Manual] : For advanced users. You can adjust the recording level manually. Select [Rec. level] and while looking at the level meter, press the <YA>/<ZO> button to adjust. The loudest sound will be displayed for approx. 3 sec. Adjust so that the level meter on the right of “12”...
Page 199 3 Movie Menu Function Settings Movie Servo AF The default setting is [Enable]. You can focus by pressing the shutter button halfway regardless of the setting. • When [Enable] is set: • You can shoot a movie while focusing a moving subject continuously.
Page 200 3 Movie Menu Function Settings AF with shutter button during k (movie recording) When you press the shutter button while shooting a movie, you can shoot a still photo. The default setting is [ONE SHOT]. • When [ONE SHOT] is set: •...
Page 201 Movie Shooting Cautions Internal Temperature Warning <s> (in white) or <E> (in red) After prolonged shooting or when shooting under a high ambient temperature, the camera’s internal temperature will increase and the white <s> icon or red <E> icon will appear in white or red on the screen. The white <s>...
Page 202 Movie Shooting Cautions Still Photo Shooting During Movie Shooting Regarding the image quality of still photos, see “Image Quality” on page 128. If the shutter button is pressed halfway to focus while shooting movies, you may experience the following irregularities. •...
Page 203 When you get good at using the camera, you can get a feel for setting the shutter speed and aperture. Taking pictures will then become more fun. Even mundane, everyday scenes can become interesting snapshots. Feel free to experiment and use the camera to its fullest.
Page 204: Handy Features
Handy Features 3 Disabling the Beeper You can prevent the beeper from sounding when focus is achieved, during self-timer operation, and during touch screen operations. Under the [53] tab, select [Beep], then press <Q/0>. Select [Disable], then press <Q/0>. To silence the beeper only during touch screen operations, select [Touch to 3 Card Reminder This setting prevents shooting if there is no card in the camera.
Page 205: Setting The Image Review Time
Handy Features 3 Setting the Image Review Time You can change how long the image is displayed on the LCD monitor immediately after capture. If [Off] is set, the image will not be displayed immediately after image capture. If [Hold] is set, the image review will be displayed up until the [LCD auto off] time.
Page 206: Setting Power-Saving Features (Lcd Auto Off, Camera Auto Off)
Handy Features 3 Setting Power-saving Features (LCD auto off, Camera auto off) If you do not operate the camera for a while, the LCD monitor will turn off automatically to save power. If you further leave the camera alone, the camera’s power will turn off automatically. You can set the time until when the LCD monitor turns off and when the camera’s power turns off automatically.
Page 207: Adjusting The Lcd Monitor Brightness
Handy Features 3 Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to read. You can either use the menu to set the brightness level or set the Custom Function to make it brighter temporarily. Adjusting the brightness with the menu Under the [52] tab, select [LCD...
Page 208: Creating And Selecting A Folder
Handy Features 3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This operation is optional since a folder will be created automatically for saving captured images. Creating a Folder Select [Select folder].
Page 209: Selecting A Folder
Handy Features Selecting a Folder With the folder selection screen Lowest file number displayed, select a folder and press Number of images in folder <Q/0>. Subsequent captured images will be recorded into the selected folder. Folder name Highest file number About Folders As with “100CANON”...
Page 210: File Numbering Methods
Handy Features 3 File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG.
Page 211 Handy Features [Auto reset]: The file numbering restarts from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is convenient if you want to organize images by cards or folders.
Page 212: Setting Copyright Information
Handy Features 3 Setting Copyright InformationN When you set the copyright information, it will be appended to the image as Exif information. Select [Copyright information]. Under the [54] tab, select [Copyright information], then press <Q/0>. Select the option to be set. Select [Enter author’s name] or [Enter copyright details], then press <Q/0>.
Page 213 Handy Features Text Entry Procedure Changing the entry area: Press the button to toggle between the top and bottom entry areas. Moving the cursor: Either tap [ ] or press the <YA>/<ZO> button to move the cursor. Entering text: In the bottom area, type directly with the keyboard or turn the <5>...
Page 214: Auto Rotation Of Vertical Images
Handy Features 3 Auto Rotation of Vertical Images When you shoot a vertical image and view it with the camera or personal computer, it will be rotated automatically to the vertical orientation. You can change this setting. Under the [51] tab, select [Auto rotate], then press <Q/0>.
Page 215: Checking Camera Settings
Handy Features 3 Checking Camera Settings With the [54] tab’s [Displays camera settings], you can check the major camera settings. Settings display Card remaining capacity Color space (p.176) WB correction (p.174)/ WB bracketing (p.175) Touch control (p.63) Auto rotate display (p.214) Date/Time (p.40) Daylight saving time (p.42) Beeper (p.204)
Page 216: Reverting The Camera To The Default Settings
Handy Features 3 Reverting the Camera to the Default SettingsN In movie shooting mode or in one of the Creative Zone still photo shooting modes, the camera’s shooting settings and menu settings can be reverted to their defaults. With this procedure, all settings in all shooting modes, including Scene Intelligent Auto, will revert to their default values.
Page 217 Handy Features Still Photo Shooting Settings Image-recording Settings Image quality Shooting mode (Creative Auto) Picture Style Auto AF operation One-Shot AF Auto Lighting Standard Optimizer u (Single Drive mode shooting) Peripheral Enable/ illumination Correction q (Evaluative Metering mode correction data retained metering) ISO speed AUTO (Auto)
Page 218 Handy Features Camera Settings Movie Shooting Settings Camera auto off 1 min. Movie auto Shooting mode exposure Beep Enable Release shutter FlexiZone - Enable AF method without card Single Image review 2 sec. Movie Servo AF Enable z Histogram AF with shutter Disable ONE SHOT display...
Page 219: Changing The Shooting Settings Screen Color
Handy Features 3 Changing the Shooting Settings (B Quick Control) Screen Color You can change the background color of the shooting settings screen. Under the [53] tab, select [Screen color], then press <Q/0>. Select the desired color, then press <Q/0>.
Page 220: Setting Speedlite Functions
Setting Speedlite FunctionsN You can set Speedlite functions with the menu. Applicable only to a compatible EX-series Speedlite when attached to the camera. The setting procedure is the same as that for setting a camera menu function. Select [External Speedlite control]. Under the [A1] tab, select [External Speedlite control], then press <Q/ 0>.
Page 221 3 Setting Speedlite FunctionsN [Flash sync. speed in Av mode] You can set the flash-sync speed for flash photography in the aperture-priority AE (f) mode. : Auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness. High-speed sync is also possible.
Page 222: Flash Function Settings
3 Setting Speedlite FunctionsN [Flash function settings] You can set the functions in the table below. Note that the functions displayed will vary depending on the Speedlite model. Select [Flash function settings]. The flash functions will be displayed. Sample screen Flash mode Wireless functions Flash zoom (Flash coverage)
Page 223 3 Setting Speedlite FunctionsN Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the exposure starts. If [Second-curtain synchronization] is set, the flash will fire right before the shutter closes. When this is combined with a slow shutter speed, you can create a trail of light such as from car headlights at night.
Page 224 3 Setting Speedlite FunctionsN Setting the Speedlite Custom Functions The Custom Functions displayed under [Flash C.Fn settings] will vary depending on the Speedlite model. Display the Custom Function. With the camera ready to shoot with an external Speedlite, select [Flash C.Fn settings], then press <Q/ 0>.
Page 225: Automatic Sensor Cleaning
f Automatic Sensor Cleaning When you switch the power to <1> or <2> (or Camera auto off), the Self Cleaning Sensor Unit will operate automatically to remove dust on the image sensor. Normally, you need not pay attention to this operation.
Page 226: Manual Sensor Cleaning
Before cleaning the sensor, detach the lens from the camera. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Set the power to <2>.
Page 227: Appending Dust Delete Data
Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later.
Page 228: Photograph A Solid-White Object
3 Appending Dust Delete DataN Photograph a solid-white object. At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the LCD monitor with a patternless, solid-white object and take a picture. The picture will be taken in aperture- priority AE mode at an aperture of f/22.
Page 229: Image Playback
Viewing images on a large TV screen is a very different experience from seeing them on a computer screen. Seeing photos on a large screen is another way to enjoy them. Image Playback This chapter explains functions related to viewing photos and movies, in more detail than in Chapter 2 “Scene Intelligent Auto + Basic Zone Modes and Image Playback”.
Page 230: Playing Back With The Touch Screen
d Playing Back with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for playback operations. Press the <x> button to play back images. (The last shot will appear first.) If the power is off, you can hold down the <x> button for 2 sec. or longer to turn on the camera and display the playback screen.
Page 231 d Playing Back with the Touch Screen Reduce Images (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the screen changes from a single-image display to a 4-image index display and 9-image index display.
Page 232: I Jumping Through Images (Jump Display)
I Jumping through Images (Jump Display) With the single-image display, you can turn the <5> dial to jump through the images forward or backward according to the jump method set. Select [Image jump with Under the [x2] tab, select [Image jump with 5], then press <Q/ 0>.
Page 233: Rotating The Image
b Rotating the Image You can rotate the image for viewing. Select [Rotate image]. Under the [x1] tab, select [Rotate image], then press <Q/0>. Select an image. Press the <YA>/<ZO> button to select the image to be rotated. You can also select an image on the index display (p.231).
Page 234: Setting Ratings
Setting Ratings You can rate images and movies with one of five rating marks: l/m/ n/o/p. This function is called rating. Select [Rating]. Under the [x2] tab, select [Rating], then press <Q/0>. Select an image. Press the <YA>/<ZO> button to select an image or movie to be rated.
Page 235 3 Setting Ratings The total number of images with a given rating that can be displayed is 999. If there are more than 999 images with a given rating, [###] will be displayed for that rating. Taking Advantage of Ratings With [x2: Image jump with 5], you can display only images and movies with a specific rating.
Page 236: Q Quick Control During Playback
Q Quick Control During Playback During playback, you can press <Q/0> to set any of the following: : Protect images], [b: Rotate image], [9: Rating], [U: Creative filters], [S: Resize (JPEG images only)], and [e: Image jump with For movies, only the functions in bold above can be set. During playback, the Quick Control screen can be displayed only with Q Quick Control, and not with the B button.
Page 237: Enjoying Movies
k Enjoying Movies Playback on a TV set (p.247, 251) Use the AV cable AVC-DC400ST or HDMI cable HTC-100 (both sold separately) to connect the camera to a TV set. Then you can play captured movies and still photos on the TV. If you have a High-Definition TV set and connect your camera with an HDMI cable, you can watch Full High-Definition...
Page 238 k Enjoying Movies Playback and Editing with a Personal Computer (p.340) The movie files recorded on the card can be transferred to a personal computer and played or edited with ImageBrowser EX (provided software). To have the movie play back smoothly on a personal computer, use a high-performance personal computer.
Page 239: Movie Playback P
k Playing Movies Play back the image. Press the <x> button to display images. Select a movie. Press the <YA>/<ZO> button to select a movie. On the single-image display, the < 1> icon displayed on the upper left indicates a movie. If the movie is a video snapshot, <...
Page 240 k Playing Movies Movie Playback Panel Operation Playback Description Play Pressing <Q/0> toggles between play and stop. Adjust the slow motion speed by pressing the <YA>/ Slow motion <ZO> button. The slow-motion speed is indicated at the upper right of the screen. First frame Displays the movie’s first frame.
Page 241: Editing A Movie's First And Last Scenes
X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in 1-sec. increments (except for video snapshots). On the movie playback screen, select [X]. The editing screen will be displayed. Specify the part to be edited out.
Page 242: Save The Edited Movie
X Editing a Movie’s First and Last Scenes Save the edited movie. Select [W], then press <Q/0>. The save screen will appear. To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press <Q/0>.
Page 243: Slide Show (Auto Playback)
Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. Select [Slide show]. Under the [x2] tab, select [Slide show], then press <Q/0>. Select the images to be played Number of images to be played from one of the following: [iAll images], [kMovies], [zStills],...
Page 244 3 Slide Show (Auto Playback) [iDate], [nFolder], or [9Rating] Select the date, folder, or rating of the images to be played. When <zH> is highlighted, press the button. Select the desired option, then press <Q/0>. [Date] [Folder] [Rating] Item Playback Description jAll images All the still photos and movies on the card will be played back.
Page 245: Start The Slide Show
3 Slide Show (Auto Playback) [Display time] [Repeat] [Transition effect] [Background music] Start the slide show. Select [Start], then press <Q/0>. After [Loading image...] is displayed, the slide show will start. Quit the slide show. To quit the slide show and return to the setting screen, press the <M>...
Page 246 3 Slide Show (Auto Playback) Selecting the Background Music Select [Background music]. Set [Background music] to [On], then press <Q/0>. Select the background music. Press the <Wj/i>/<XL> button to select the background music, then press <Q/0>. You can also select multiple background music tracks.
Page 247: Viewing The Images On Tv
Viewing the Images on TV You can view the still photos and movies on a TV set. Adjust the movie’s sound volume with the TV set. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and TV set.
Page 248: During Shooting
Viewing the Images on TV Press the <x> button. The image will appear on the TV screen. (Nothing will be displayed on the camera’s LCD monitor.) The images will automatically be displayed at the TV’s optimum resolution. By pressing the button, you can change the display format.
Page 249 Viewing the Images on TV Using HDMI CEC TV Sets If the TV set connected to the camera with an HDMI cable is compatible with HDMI CEC*, you can use the TV set’s remote control for playback operations. * An HDMI-standard function enabling HDMI devices to control each other so that you can control them with one remote control unit.
Page 250: Movie Playback Menu
Viewing the Images on TV Press the remote control’s Enter Still photo playback menu button. The menu appears and you can Movie playback menu perform the playback operations shown on the left. Press the button to select the : Return desired option, then press the Enter : 9-image index button.
Page 251 Connect the AV cable AVC- DC400ST (sold separately) to the camera. With the plug’s <Canon> logo facing the back of the camera, insert it into the <q > terminal. Connect the AV cable to the TV (Red) set.
Page 252: K Protecting Images
K Protecting Images Protecting an image prevents it from being erased accidentally. 3 Protecting a Single Image Select [Protect images]. Under the [x1] tab, select [Protect images], then press <Q/0>. Select [Select images]. Select [Select images], then press <Q/0>. Protect the image. Image protect icon Use the <YA>/<ZO>...
Page 253 K Protecting Images 3 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at one time. When you select [All images in folder] or [All images on card] in [x1: Protect images], all the images in the folder or on the card will be protected.
Page 254: L Erasing Images
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.252) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.
Page 255 L Erasing Images Select [Select and erase images]. Select [Select and erase images], then press <Q/0>. The images will be displayed. By touching the LCD monitor with two fingers spread apart and then pinching the fingers, a three-image display will appear.
Page 256: B: Shooting Information Display
B: Shooting Information Display Sample Image Taken in a Creative Zone Mode Protect images Exposure compensation amount Rating Flash exposure Folder number - compensation amount File number Aperture Histogram Shutter speed (Brightness/RGB) Picture Style/Settings Metering mode Shooting mode ISO speed Highlight tone priority White balance Color space...
Page 257 B: Shooting Information Display Sample Image Taken in a Basic Zone Mode Ambience and Shooting mode ambience effects Lighting or scene * With images taken in the Scene Intelligent Auto or a Basic Zone mode, the information displayed will differ depending on the shooting mode. * Photos taken in the <C>...
Page 258: About The Histogram
B: Shooting Information Display About the Highlight Alert When the shooting information is displayed, any overexposed areas of the image will blink. To obtain more image detail in the overexposed areas, set the exposure compensation to a negative amount and shoot again. About the Histogram The brightness histogram shows the exposure level distribution and overall brightness.
Page 259: Post-Processing Images During Playback
Even without a personal computer, you can easily do some image adjustments with the camera. Another fun thing about digital cameras. Post-Processing Images During Playback After shooting, you can apply Creative filters or resize the images (downsize the pixel count). The camera may not be able to process images taken with another camera.
Page 260: U Creative Filters
U Creative Filters You can apply Creative filters even during image playback. An image applied with a Creative filter during playback can be saved as a new image, leaving the original image intact. You can use the same Creative filters that are available during shooting (p.94).
Page 261 U Creative Filters Adjust the filter effect. Press the <YA>/<ZO> button to adjust the filter effect, then press <Q/0>. For the Miniature effect, press the <Wj/i>/<XL> button and select the image area (within the white frame) where you want the image to look sharp.
Page 262: S Resize
S Resize You can resize an image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3/4/a/b images. JPEG c and RAW images cannot be resized. You can also resize with the Q Quick Control screen. Select [Resize].
Page 263 S Resize Save the image. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4. Press the <M> button to return to the menu. Resize Options According to Original Image Size Available Resize Settings Original Image Size...
Page 264 S Resize About Image Sizes The image size displayed in step 3 on page 262, such as [***M ****x****], has a 3:2 aspect ratio. The image size according to aspect ratios is shown in the table below. The asterisked image-recording quality figures do not exactly match the aspect ratio.
Page 265: Printing Images
You can print your photos on various types of papers. Why not try a luxurious finish like that of a coffee table photobook? High-quality prints can offer another way to enjoy your photos in addition to viewing them on a screen. Printing Images Printing (p.266) You can connect the camera directly to a printer and print...
Page 266: Preparing To Print
Preparing to Print The direct printing procedure can be performed entirely with the camera while you look at the LCD monitor. Connecting the Camera to a Printer Set the camera’s power to <2>. Set up the printer. For details, see the printer’s instruction manual.
Page 267 Preparing to Print Play back the image. PictBridge Press the < > button. The image will appear, and the <w> icon will appear on the upper left to indicate that the camera is connected to a printer. Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct.
Page 268: Wprinting
wPrinting The screen display and setting options will differ depending on the printer. Some settings may not be available. For details, refer to the printer’s instruction manual. Printer-connected icon Select the image to be printed. Check that the <w> icon is displayed on the upper left of the LCD monitor.
Page 269 wPrinting Q Setting the Paper Size Select the size of the paper loaded in the printer, then press <Q/0>. The paper type screen will appear. Y Setting the Paper Type Select the type of the paper loaded in the printer, then press <Q/0>. The page layout screen will appear.
Page 270: Set The Printing Effects
wPrinting Set the printing effects. Set them if necessary. If you do not need to set any printing effects, go to step 5. What is displayed on the screen differs depending on the printer. Select the option, then press <Q/ 0>.
Page 271 wPrinting Set the date and file number imprinting. Set it if necessary. Select < >, then press <Q/0>. Set as desired, then press <Q/ 0>. Set the number of copies. Set it if necessary. Select < >, then press <Q/0>. Set the number of copies, then press <Q/0>.
Page 272 wPrinting e Adjustment of Printing Effects In step 4 on page 270, select the printing effect. When the <ze> icon is displayed brightly, you can press the button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
Page 273: Trimming The Image
wPrinting Trimming the Image You can crop the image and print only Tilt correction the trimmed portion as if the image was recomposed. Set the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again before printing.
Page 274: Error Messages
wPrinting Depending on the printer, the trimmed image area may not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look in the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame may not be displayed accurately.
Page 275: W Digital Print Order Format (Dpof)
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file number imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options Select [Print order].
Page 276 W Digital Print Order Format (DPOF) Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Print type Both Prints both the standard and index prints. Date [On] imprints the recorded date on the print. File number [On] imprints the file number on the print.
Page 277: Print Ordering
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. By touching the LCD monitor with two fingers spread apart and then pinching the fingers, a three-image display will appear. You can then select images. To return to the single screen, touch the LCD monitor with two pinched fingers, then spread the fingers.
Page 278: W Direct Printing With Dpof
W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. Prepare to print. See page 266. Follow the “Connecting the Camera to a Printer” procedure up to step 5. Under the [ 1] tab, select [Print order]. Select [Print].
Page 279: Specifying Images For A Photobook
p Specifying Images for a Photobook When you select images to use in photobooks (up to 998 images) and use EOS Utility (provided software) to transfer them to a computer, the selected images will be copied into a dedicated folder. This function is useful for ordering photobooks online and for printing photobooks on a printer.
Page 280 p Specifying Images for a Photobook Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at one time. When [x1: Photobook Set-up] is set to [All images in folder] or [All images on card], all the images in the folder or card will be specified.
Page 281: Customizing The Camera
After you learn how to use the camera, customizing its functions makes it easier to use. Customizing and becoming expert at your camera expands the joy of shooting. Customizing the Camera You can customize various camera functions to suit your picture-taking preferences with Custom Functions. Custom Functions can be set and used only in Creative Zone modes.
Page 282: Setting Custom Functions
Setting Custom FunctionsN Select [Custom Functions (C.Fn)]. Under the [54] tab, select [Custom Functions (C.Fn)], then press <Q/ 0>. Select the Custom Function Custom Function number number. Press the <YA>/<ZO> button to select the Custom Function number, then press <Q/0>. Change the setting as desired.
Page 283: Custom Functions
3 Setting Custom FunctionsN Custom Functions C.Fn I: Exposure Still Photo Movie Shooting Shooting Exposure level increments p.284 ISO expansion C.Fn II: Image Highlight tone priority p.285 C.Fn III: Autofocus AF-assist beam (LED) firing p.286 * If you use an EX-series Speedlite (sold separately) equipped with an LED light, the LED light will turn on for AF-assist even in the c, o, and d modes.
Page 284: Custom Function Settings
Custom Function SettingsN Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus, C.Fn IV: Operation/Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc.
Page 285: C.fn Ii: Image
3 Custom Function SettingsN C.Fn II: Image C.Fn-3 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, the Auto Lighting Optimizer (p.159) is automatically set to [Disable] and the setting cannot be changed.
Page 286: C.fn Iii: Autofocus
3 Custom Function SettingsN C.Fn III: Autofocus C.Fn-4 AF-assist beam (LED) firing You can enable or disable the AF-assist beam. 0: Enable When necessary, the self-timer/AF-assist beam will emit the AF-assist beam. This setting is applicable also for LED-compatible external flashes. 1: Disable The AF-assist beam is not emitted.
Page 287: Xl Button Function
3 Custom Function SettingsN C.Fn-6 XL button function You can assign a frequently-used function to the <XL> button. While the camera is ready to shoot, press <XL>. F point) 0: Normal (set center A 1: Depth-of-field previe The aperture opening (diaphragm) changes only at the moment when the picture is taken.
Page 288: Registering My Menu
Registering My MenuN Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <Q/0>. Select [Register to My Menu]. Select [Register to My Menu], then press <Q/0>.
Page 289: Reference
Reference This chapter provides reference information for camera features, system accessories, etc. Certification Logo Under the [54] tab, if you select [Certification Logo Display] and press <Q/0>, some of the logos of the camera’s certifications will appear. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
Page 290: Using A Household Power Outlet
Using a Household Power Outlet With AC Adapter Kit ACK-E12 (sold separately), you can connect the camera to a household power outlet and not worry about the remaining battery level. Insert the DC Coupler. Open the cover and insert the DC Coupler until it locks in place.
Page 291: Remote Control Shooting
Remote Control Shooting Remote Controller RC-6 (Sold Separately) This Remote Controller enables you to take pictures wirelessly up to approx. 5 meters/16.4 feet from the front of the camera. You can either shoot immediately or use a 2-sec. delay. Remote control sensor Set the self-timer to <Q>...
Page 292: External Speedlites
External Speedlites EOS-dedicated, EX-series Speedlites The basic operation is simple. When an EX-series Speedlite (sold separately) is attached to the camera, almost all the automatic flash control is done by the camera. In other words, it is almost the same as using a built-in flash. For detailed instructions, refer to the EX-series Speedlite’s instruction manual.
Page 293: Using Non-Canon Flash Units
Using Non-Canon Flash Units Sync Speed The camera can synchronize with compact, non-Canon flash units at 1/200 sec. or slower shutter speeds. Use a sync speed slower than 1/200 sec. Be sure to test the flash unit beforehand to make sure it synchronizes properly with the camera.
Page 294: Using Eye-Fi Cards
Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card’s manufacturer.
Page 295 Using Eye-Fi Cards Check the [Access point SSID:]. Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the <M> button three times to exit the menu. Take the picture.
Page 296: Function Availability Table According To Shooting Mode
Function Availability Table According to Shooting Mode o: Set automatically k: User selectable : Not selectable/Disabled Basic Zone Creative Zone Shooting Mode C 2 3 4 5 6 F G d s f a k M All image quality settings k k k k k k k k k k k k k k k selectable Automatically set/...
Page 297 Function Availability Table According to Shooting Mode Basic Zone Creative Zone Shooting Mode C 2 3 4 5 6 F G d s f a k M Continuous AF k k k k k k k k k k k k k Movie Servo AF AF-assist beam o o o o o o o o o k k k k...
Page 298: System Map
System Map 600EX-RT/ Macro Ring Lite Macro Twin Lite ST-E2** ST-E3-RT 90EX 270EX II 320EX 430EX II 600EX MR-14EX MT-24EX Bundled Accessories Neck Strap EM-100DB Neck Strap EM-E1 AC Adapter Kit ACK-E12 Wrist Strap Battery Pack ER-E1 LP-E12 Battery Charger LC-E12 or LC-E12E DC Coupler DR-E12...
Page 299 System Map Remote GPS Receiver Controller GP-E2* RC-6 EF-M lenses EF lenses EF-S lenses Mount Adapter EF-EOS M External microphone HDMI Cable HTC-100 (2.9 m/9.5 ft.) TV/Video Stereo AV Cable AVC-DC400ST (1.3 m/4.3 ft.) PictBridge-compatible printer EOS DIGITAL Instruction Software Solution Disk Manual Instruction Manual...
Page 300: Menu Settings
Menu Settings Still Photo Shooting 1 (Red) Page 73 / 83 / 74 / 84 / 7a / 8a / b / c / Image quality 1+73 / 1 Aspect ratio 3:2 / 4:3 / 16:9 / 1:1 Grid display Off / Grid 1l / Grid 2m z Histogram display Disable / Brightness / RGB Release shutter...
Page 301 3 Menu Settings Shooting 2 (Red) Page AF operation One-Shot AF / Servo AF u+Tracking / FlexiZone - Multi / FlexiZone - AF method Single Continuous AF Enable / Disable Focus mode AF / MF / AF+MF Image Stabilizer Enable / Disable Peripheral illumination: Enable / Disable Lens aberration correction...
Page 302 3 Menu Settings Shooting 4 (Red) Page Custom White Manual setting of white balance Balance WB correction: White balance correction White balance shift/ bracketing BKT setting: White balance bracketing Color space sRGB / Adobe RGB DAuto / PStandard / QPortrait / Picture Style RLandscape / SNeutral / UFaithful / VMonochrome / WUser Def.
Page 303 3 Menu Settings Playback 1 (Blue) Page Select images / All images in folder / Unprotect Protect images all images in folder / All images on card / Unprotect all images on card Rotate image Rotate vertical images Select and erase images / All images in folder / Erase images All images on card Print order...
Page 304 3 Menu Settings Set-up 1 (Yellow) Page Select folder Create and select a folder File numbering Continuous / Auto reset / Manual reset Auto rotate OnzD / OnD / Off Format card Initialize and erase data on the card Displayed when a commercially-available Eye- Eye-Fi settings Fi card is used.
Page 305 3 Menu Settings Set-up 3 (Yellow) Page Beep Enable / Touch to / Disable Screen color Select the shooting settings screen color Feature guide Enable / Disable Touch control Standard / Sensitive Auto cleaning: Enable / Disable Sensor cleaning Clean now GPS device settings Set when GPS device attached Set-up 4 (Yellow)
Page 306 3 Menu Settings Movies Shooting 1 (Red) Page 73 / 83 / 74 / 84 / 7a / 8a / b / c / Image quality 1+73 / 1 Grid display Off / Grid 1l / Grid 2m z Histogram display Disable / Brightness / RGB Release shutter Enable / Disable without card...
Page 307 3 Menu Settings Shooting 3 (Red) Page Exposure 1/3-stop or 1/2-stop increments, ±5 stops compensation AUTO / 100 / 200 / 400 / 800 / 1600 / 3200 / ISO speed 6400 / H Disable / Low / Standard / High Auto Lighting Optimizer Disable during manual exposure...
Page 308 3 Menu Settings Movie 1 (Red) Page 1920x1080 (6 / 5 / 4) / 1280x720 (8/7) / Movie recording size 640x480 (6/5) Sound recording: Auto / Manual / Disable Sound recording Recording level Wind filter/Attenuator: Disable / Enable Video snapshot: Enable / Disable Album settings: Create a new album / Add to Video snapshot existing album...
Page 309 3 Menu Settings Playback 2 (Blue) Page x Histogram display Brightness / RGB 1 image / 10 images / 100 images / Date / Image jump with 5 Folder / Movies / Stills / Rating Images (content) to play back / Display time / Slide show Repeat / Transition effect / Background music Rating...
Page 310 3 Menu Settings Set-up 3 (Yellow) Page Beep Enable / Touch to / Disable Screen color Select the shooting settings screen color Feature guide Enable / Disable Touch control Standard / Sensitive Auto cleaning: Enable / Disable Sensor cleaning Clean now GPS device settings Set when GPS device attached Set-up 4 (Yellow)
Page 311: Troubleshooting Guide
Check that the battery pack is properly attached to the battery charger. Check that the battery charger is properly connected to the power outlet. Do not recharge any battery pack other than a genuine Canon Battery Pack LP-E12. The battery charger’s lamp blinks.
Page 312 Troubleshooting Guide The battery becomes exhausted quickly. Use a fully-charged battery pack (p.32). The rechargeable battery pack performance will degrade over repeated use. Purchase a new one. The number of possible shots will decrease with any of the following operations: •...
Page 313 Troubleshooting Guide Shooting-Related Problems No images can be shot or recorded. Make sure the card is properly inserted (p.34). Slide the card’s write-protect switch to the Write/Erase position (p.34). If the card is full, replace the card or delete unnecessary images to make room (p.34, 254).
Page 314 Troubleshooting Guide When [FlexiZone - Multi] is set, it takes longer for the camera to focus automatically. Depending on the shooting conditions, it may take longer to focus the subject. Use [FlexiZone - Single] or focus manually. The continuous shooting speed is slow. Depending on the lens type, shutter speed, aperture, subject conditions, brightness, etc., the continuous shooting speed may become slower.
Page 315 Troubleshooting Guide The maximum burst during continuous shooting is lower. With <F> (Handheld Night Scene) or <G> (HDR Backlight Control) shooting mode, the maximum burst for continuous shooting will greatly decrease (p.87). With ISO 12800 or “H” (equivalent to ISO 25600), the maximum burst for continuous shooting will greatly decrease (p.111).
Page 316 Troubleshooting Guide Even though I set a decreased exposure compensation, the image comes out bright. Set [A3: Auto Lighting Optimizer] to [Disable]. When [Standard/ Low/High] is set, even if you set a decreased exposure compensation or flash exposure compensation, the image may come out bright (p.159). When I use the <f>...
Page 317 Troubleshooting Guide High-speed sync cannot be set in the <f> mode. Under [A1: External Speedlite control], set [Flash sync. speed in Av mode] to [Auto] (p.221). During shooting, the white <s> icon or red <E> icon is displayed. This icon indicates that the camera’s internal temperature is too high. The white <s>...
Page 318 Troubleshooting Guide The subject looks distorted during movie shooting. If you move the camera to the left or right quickly (high-speed panning) or shoot a moving subject, the image may look distorted. The image flickers or horizontal stripes appear during movie shooting. Flickering, horizontal stripes (noise), or irregular exposures can be caused by fluorescent light, LED bulbs, or other light sources during movie shooting.
Page 319 Troubleshooting Guide Display Problems The menu screen shows few tabs and options. With Scene Intelligent Auto, Basic Zone modes, and the movie shooting mode, certain tabs and menu options are not displayed. Set the shooting mode to a Creative Zone mode (p.54). The file name’s first character is an underscore (“_”).
Page 320 Troubleshooting Guide The LCD monitor does not display a clear image. If the LCD monitor is dirty, use a soft cloth to clean it. In low or high temperatures, the LCD monitor display may seem slow or may look black. It will return to normal at room temperature. [Eye-Fi settings] does not appear.
Page 321 Troubleshooting Guide When the movie is played back, camera operation noise can be heard. If you operate the camera’s dials or lens during movie shooting, the operation noise will also be recorded. Using an external microphone (commercially available) is recommended (p.197). The movie has still moments.
Page 322 Troubleshooting Guide Sensor Cleaning Problems The shutter makes a noise during sensor cleaning. If you selected [Clean nowf], the shutter will make a noise, but no picture is taken (p.225). Automatic sensor cleaning does not work. If you repeatedly switch the power to <1>/<2> at a short interval, the <f>...
Page 323: Error Codes
50, 70, Operate the power button, remove and install the battery pack 80, 99 again, or use a Canon lens (p.37, 34). An error prevented shooting. Turn the camera off and on again or re-install the battery. The lens movement may be obstructed. Turn the camera off and on again, taking care not to touch the lens.
Page 324: Specifications
* Compatible with UHS-I Image sensor size: Approx. 22.3 x 14.9 mm Compatible lenses: Canon EF-M, EF*, and EF-S* lenses * Mount Adapter EF-EOS M required. (35 mm-equivalent focal length is approx. 1.6 times the lens focal length) Lens mount: Canon EF-M mount •...
Page 325 Specifications Noise reduction: Applicable to long exposures and high ISO speed shots Automatic image brightness correction: Auto Lighting Optimizer Highlight tone priority: Provided Lens optical correction: Peripheral illumination correction, Chromatic aberration correction • Autofocus Type: Hybrid CMOS AF System AF points: 31 points (Max.) Focusing brightness range:EV 1 - 18 (at 23°C/73°F, ISO 100) Focus mode:...
Page 326 RAW: Approx. 6 (approx. 6) shots RAW+JPEG Large/Fine: Approx. 3 (approx. 3) shots * Figures are based on Canon’s testing standards (ISO 100 and “Standard” Picture Style) using an 8 GB card. * Figures in parentheses apply to an UHS-I compatible 8 GB card based on Canon’s testing standards.
Page 327: Manual Focusing
Specifications • Movie Shooting Movie compression: MPEG-4 AVC/H.264 Variable (average) bit rate Audio recording format: Linear PCM Recording format: Recording size and frame rate: 1920x1080 (Full HD) : 30p/25p/24p 1280x720 (HD) : 60p/50p 640x480 (SD) : 30p/25p * 30p: 29.97 fps, 25p: 25.00 fps, 24p: 23.976 fps, 60p: 59.94 fps, 50p: 50.00 fps File size: 1920x1080 (30p/25p/24p): Approx.
Page 328 Specifications • LCD Monitor Type: TFT color liquid-crystal monitor Monitor size and dots: Wide, 7.7 cm (3.0-in.) (3:2) with approx. 1.04 million dots Brightness adjustment: Manual (7 levels) Interface languages: Feature guide: Displayable • Playback Image display formats: Single-image display, Single-image + Info display (Basic info, shooting info, histogram), 4-image index, 9-image index, image rotate possible Zoom magnification:...
Page 329 Specifications • Interface Audio/video OUT/ Digital terminal: Analog video (compatible with NTSC/PAL)/stereo audio output Personal computer communication and direct printing (Hi-Speed USB equivalent), GPS receiver GP-E2 connection HDMI mini OUT terminal: Type C (auto switching of resolution), CEC-compatible External microphone IN terminal: 3.5 mm diameter stereo mini-jack Wireless remote control: Remote Controller RC-6...
Page 330 Weight: Approx. 76 g / 2.7 oz. (excluding power cord) All the data above is based on Canon’s testing standards and CIPA (Camera & Imaging Products Association) testing standards and guidelines. Dimensions, maximum diameter, length and weight listed above are based on CIPA Guidelines (except weight for camera body only).
Page 331 Trademarks Adobe is a trademark of Adobe Systems Incorporated. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc. in the United States and other countries. SDXC logo is a trademark of SD-3C, LLC.
Page 332 Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non- genuine Canon accessories (e.g., a leakage and/or explosion of a battery...
Page 333: Safety Warnings
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet.
Page 334 • Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard. If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center.
Page 335 If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516)328-5600 This Class B digital apparatus complies with Canadian ICES-003.
Page 336 4. Do not expose the charger to rain or snow. 5. Use of an attachment not recommended or sold by Canon may result in fire, electric shock, or personal injury. 6. To reduce risk of damage to electric plug and cord, pull by plug rather than by cord when disconnecting charger.
Page 337: Downloading Images To A Personal Computer And Index
Your digital images are very precious. Be sure to save them to your personal computer regularly. Downloading Images to a Personal Computer and Index This chapter explains how to download images from the camera to your personal computer, gives an overview of the software in the EOS DIGITAL Solution Disk (CD- ROM) provided with the camera, and explains how to install the software on your personal computer.
Page 338: Downloading Images To A Personal Computer
Downloading Images to a Personal Computer You can use the provided software to download the images in the camera to your personal computer. There are two ways to do this. Download by Connecting the Camera to the Personal Computer Install the software (p.341). Use the provided interface cable to connect the camera to your personal computer.
Page 339: Downloading Images With A Card Reader
For details, refer to the Software Instruction Manual on the CD-ROM. When downloading images from the camera to your personal computer, if you do not use Canon software and instead use a card reader, copy the DCIM folder on the card to your personal computer.
Page 340: About The Software
Also, you can copy background music tracks, such as EOS Sample Music*, to the card. * Five original background music tracks are provided by Canon. Use EOS Utility to copy the background music tracks to the card, and you can play the background music during playback of video snapshot albums, movies, and slide shows with the camera.
Page 341: Installing The Software
Insert EOS DIGITAL Solution Disk (CD-ROM). For Macintosh, double-click to open the CD-ROM icon displayed on the desktop, then double-click on [Canon EOS Digital Installer]. Click [Easy Installation] and follow the on-screen instructions to install.
Page 342: Software Instruction Manual
Software Instruction Manual Contains the Software Instruction Manuals. Copying and Viewing the Instruction Manual PDFs Insert the [Software INSTRUCTION MANUAL] CD-ROM into your computer. Double-click the CD-ROM icon. For Windows, the icon is displayed in [(My) Computer]. For Macintosh, the icon is displayed on the desktop. Copy the [English] folder to your computer.
Page 343: Index
Index Numerics BGM ..........246 Black-and-white image ... 89, 115, 169 10-sec. or 2-sec. delay....136 Bracketing ......155, 175 1280x720 ........187 Brightness (exposure) ....153 1920x1080 ........187 Auto exposure bracketing 4- or 9-image index display...231 (AEB) ....... 155, 284 640x480 ........187 Autoexposure lock (AE lock)..
Page 344 Index Color tone ........168 Continuous........210 Faithful ......... 115 Continuous shooting .....133 FE lock ......... 292 Contrast ........168 Feature guide ......... 60 Copyright information....212 FEB ..........222 Creative Auto ........75 File name ........210 Creative filters......94, 260 File size ......105, 188, 256 Fill-in flash ........
Page 345 Index Manual focusing .......126 Index ........231 Out of focus ....46, 48, 123 Jump display Recompose ........71 (Image browsing) ..... 232 Magnified view ......231 Folder Create/Select .....208 Manual rotate ......233 Format (card initialization)....57 Number ........210 Frame rate ........187 Playback ......
Page 346 Index Shooting settings display....24 Menu My Menu ........288 Lens ..........27, 44 Setting procedure ...... 56 Chromatic aberration Settings........300 correction........164 Image Stabilizer......46 3 icon ........4 Lock release .......45 Metering mode ......151 Peripheral illumination MF (Manual focusing) ....126 correction........163 Microphone ........
Page 347 High ISO speed ......160 Photobook Set-up ....279 Long exposures ......161 Print Order (DPOF) ....275 Nomenclature........22 Printing effects ......270 Non-Canon flash units ....293 Tilt correction......273 Normal Trimming ........273 (Image-recording quality) ....105 Program AE........102 NTSC ......187, 304, 309 Program shift ........
Page 348 Index Sepia (Monochrome) ....89, 169 System map ......... 298 Servo AF........131 Sharpness........168 Tap (Touch) ........61 Shooting information display..256 Temperature warning ... 128, 201 Shooting mode........25 Tone priority........285 Av (Aperture-priority AE) ..144 Toning effect (Monochrome) ..169 M (Manual exposure) ....148 Touch beeping........
Page 349 MEMO...
Page 350: Canon Inc
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan The lenses and accessories mentioned in this Instruction Manual are current as of July 2012. For information on the camera’s compatibility with any lenses and accessories introduced after this date, contact any Canon Service Center. © CANON INC. 2012...

This manual is also suitable for:

Eos m

Canon EOS M EF-M 22mm STM Kit Instruction Manual

Quick Links

Related Manuals for Canon EOS M EF-M 22mm STM Kit

Summary of Contents for Canon EOS M EF-M 22mm STM Kit