Table of Contents
Advertisement
C.Fn-6
You can assign a frequently-used function to the <XL> button. While
the camera is ready to shoot, press <XL>.
0: Normal (set center A
1: Depth-of-field previe
The aperture opening (diaphragm) changes only at the moment when
the picture is taken. Otherwise, the aperture remains fully open.
Therefore, when you look at the scene on the LCD monitor, the depth
of field will look narrow.
Press the <XL> button to stop down the lens to the current aperture
setting and check the depth of field (range of acceptable focus).
Even when the aperture is stepped down, the modeling flash of an external
flash will not fire.
2: ISO speed
The ISO speed setting screen will appear. Press the <YA>/<ZO>
button or turn the <5> dial to set the ISO speed.
3: Flash exposure compensation
Set flash exposure compensation if the flash exposure of the subject
does not come out as desired. You can set the exposure compensation
up to ±2 stops in 1/3-stop increments.
4: Incr LCD brightness (temp)
Pressing the <XL> button will set the LCD monitor brightness to the
same level as the menu's "7" setting. Press the button again and it will
return to the previous brightness.
If the power turns <2> or the brightness adjustment screen is
displayed with the menu, the previous brightness will return.
C.Fn-7
0: Disable
When set to [Disable], not only the shutter button is disabled but the
<o> (Movie start/stop) button will be disabled as well. Even if you
press the button, movie recording will not start.
1: Enable
Even when no lens is attached to the camera, pressing the shutter
button completely will release the shutter.
XL button function
F point)
w
Release shutter w/o lens
3 Custom Function SettingsN
287
Advertisement
Table of Contents
