Cisco AJ732A - MDS 9134 Fabric Switch Release Note page 17

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 7
Current
SAN-OS 2.1(1b) Upgrade to SAN-OS Release 2.1(2b) and then upgrade to Release 3.3(2).
SAN-OS 2.1(1a) Upgrade to SAN-OS Release 2.1(2b) and then upgrade to Release 3.3(2).
SAN-OS 2.0(x)
SAN-OS 1.x
Use Table 8
3.3(2). Find the image release number you are currently using in the Current Release with FICON
Enabled column of the table and use the path recommended.
Table 8
Current Release with
FICON Enabled
SAN-OS 3.0(3b)
SAN-OS 3.0(2)
OL-14116-10
Nondisruptive Upgrade Path to SAN-OS Release 3.3(2) (continued)
Nondisruptive Upgrade Path
or
Upgrade to SAN-OS Release 2.1(2d) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(2e) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(3) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(2d) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(2e) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(3) and then upgrade to Release 3.3(2).
Upgrade to SAN-OS Release 2.1(2b) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(2d) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(2e) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(3) and then upgrade to Release 3.3(2).
Upgrade to SAN-OS Release 1.3(4a), then to Release 2.1(2b), and then upgrade to
Release 3.3(2).
to determine your FICON nondisruptive upgrade path to Cisco MDS SAN-OS Release
FICON Nondisruptive Upgrade Path to SAN-OS 3.3(2)
Upgrade Path
You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(2)
Upgrading Your Cisco MDS SAN-OS Software Image
17