Red Hat Enterprise Linux - Cisco AJ732A - MDS 9134 Fabric Switch Release Note

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Red Hat Enterprise Linux

The Linux kernel core dump is not supported in NX-OS Release 4.1(1b) and later versions and therefore
the CLI command has been removed. A syntax error message will be displayed if you import
configurations from SAN-OS Release 3.3(x) and earlier to NX-OS Release 4.1(1b) and later. These
syntax errors do not affect the application of other commands in the configuration and can be safely
ignored. To address this, remove the kernel core configuration from the ASCII configuration file before
importing the configuration.
Generation 1 Module Limitation
When a Cisco or other vendor switch port is connected to a Generation 1 module port (ISL connection),
the receive buffer-to-buffer credit of the port connected to a Generation 1 module port should not exceed
255.
Schedule Job Configurations
As of MDS NX-OS Release 4.1(1b) and later, the scheduler job configurations need to be entered in a
single line with a semicolon(;) as the delimiter.
Job configuration files created with SAN-OS Release 3.3(1c) and earlier, are not supported. However,
you can edit the job configuration file and add the delimiter to support Cisco NX-OS Release 4.1(1b).
Solaris Windows Manager
Solaris Windows Manager does not resize windows correctly which effects some Device Manager
screens. To resolve this, download and install the 119538-1 patch from Sun Microsystems. The patch
(119538-17 GNONE 2.6.0: Windows Manager Patch, Generic, 2008/08/08) can be obtained from
sunsolve.sun.com.
Upgrading to Recover Loss of Performance Manager Data
You must upgrade to Fabric Manager Release 3.1(x) and then upgrade to a later release of Fabric
Warning
Manager to avoid losing Performance Manager data. If data has been lost, follow the steps below to
recover the data.
Disable Performance Manager interpolation using Fabric Manager Web Client. Uncheck Interpolate
Step 1
missing statistics, then click Apply.
Step 2 Stop the Fabric Manager Server.
Step 3 Save the data file in the $INSTALL_DIR directory.
Move the old RRD file into the $INSTALL_DIR/pm/db directory.
Step 4
Run $INSTALL_DIR/bin/pm.bat m.
Step 5
OL-17675-02
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b)
Limitations and Restrictions
43