S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Use the show module command to display the type of supervisor module in the switch. The following
is sample output from the show module command on a Supervisor 2 module:
switch#
Mod
---
...
...
7
8
Upgrading Your Cisco MDS NX-OS Software Image
This section lists the guidelines recommended for upgrading your Cisco MDS NX-OS software image
and includes the following topics:
•
•
•
•
•
•
•
Before you begin the upgrade process, review the list of chassis and modules that NX-OS Release
Note
4.1(1b) supports. See the
on page
Upgrading Your Version of Cisco Fabric Manager
As of Cisco SAN-OS Release 3.2(1), Cisco Fabric Manager is no longer packaged with a Cisco MDS
9000 Family switch. It is included on the CD-ROM that ships with the switch. You can install Fabric
Manager from the CD-ROM or from files that you download.
Installing Cisco Fabric Manager is a multi-step process that involves installing a database, as well as Fabric
Manager. The complete installation instructions are provided in the "Installation of Cisco MDS NX-OS and
Fabric Manager" section in the
available on-screen once you launch the Fabric Manager installer from the CD-ROM.
OL-17675-02
show module
Ports
Module-Type
-----
-------------------------------- ------------------ ------------
0
Supervisor/Fabric-2
0
Supervisor/Fabric-2
"MDS 9000 Chassis and Module Support in Cisco MDS NX-OS 4.x" section
10.
Cisco MDS 9000 Family Fabric Manager Configuration Guide,
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b)
Upgrading Your Cisco MDS NX-OS Software Image
Model
Status
and are
15