Mds 9000 Chassis And Module Support In Cisco Mds Nx-Os 4.X - Cisco AJ732A - MDS 9134 Fabric Switch Release Note

MDS 9000 Chassis and Module Support in Cisco MDS NX-OS 4.x

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Configuring Generation 3 and Generation 2 Switching Modules
The Cisco MDS 9500 Multilayer Directors are designed to operate with any combination of Cisco MDS
9000 Generation 1, Generation 2, and Generation 3 modules. However, there are limitations to consider
when combining the various modules and supervisors in the Cisco MDS 9500 Series platform chassis.
The references listed in this section provide specific information about configurations that combine
different modules and supervisors.
For information on configuring Generation 2 and Generation 3 switching modules, refer to the
Configuring Generation 2 and Generation 3 Switching Modules chapter in the
CLI Configuration
For information on port index availability, refer to the "Port Index Availability" section in the Product
Overview chapter of the
For information on Cisco MDS 9000 hardware and software compatibility, refer to the
SAN-OS Hardware and Software Compatibility
MDS 9000 Chassis and Module Support in Cisco MDS NX-OS 4.x
Table 4
Table 4
Switch
MDS 9513
MDS 9509
MDS 9506
MDS 9222i
MDS 9216i
MDS 9216A
MDS 9216
MDS 9134
MD S 9124
MDS 9140
MDS 9120
Cisco Fabric Switch for HP c-Class BladeSystem and
Cisco Fabric Switch for IBM BladeCenter
Table 5
hardware modules supported by Cisco MDS SAN-OS 3.x, see
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b)
10
Guide.
Cisco MDS 9500 Series Hardware Installation
lists the MDS hardware chassis supported by Cisco MDS NX-OS 4.x.
Cisco MDS NX-OS 4.x Chassis Support Matrix
lists the MDS hardware modules supported by Cisco MDS NX-OS 4.x. For the list of MDS
Guide.
Information.
NX-OS 4.x Support
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Table 6.
Cisco MDS 9000 Family
Cisco MDS 9000
OL-17675-02