HP AA979A - StorageWorks SAN Switch 2/8V Release Note page 38

Table 7 Fabric OS 4.4.0c closed issues summary
Closed defect
Issue: SAN Switch 2/32 slot-0
faulted and shows "No ports
found in the system!!!" during
voltage variation.
Error Messages:
[HIL-1101], 107053,, ERROR,
Term_113, Slot 0 faulted, 2.5V
(3.30) is above threshold." and
slot is faulted.
and
CRITICAL, Term_113, System
fan(s) status Fan1=3276RPM
Fan2=3443RPM Fan3=3245RPM
Fan4=3443RPM Fan5=3276RPM
Fan6=
Issue: Name Server (NS) does
not respond and shows the error
message, 33170 ms.
Issue:
BL_1013 error message
displays on console, indicating
excessive interrupts during cable pull,
switch reboot or host reboot. In very
rare cases if and when the double
fault - fdet occurs, the blade is
faulted.
Issue: The configdownload
command fails and issues an
error message: ficulmport failed
with rc=2I
Issue: The configupload
command does not save the
FICO-CUP data in FOS 4.4.0x only.
Issue:
After firmwaredownload -sf
on Core Switch 2/64 , received
many instances of this message:
"Calling cal_CreateBladeObjectKeys
on 43100000"
38 Closed issues from Fabric OS 4.4.0c
Status
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed