Documentation Updates - HP AA979A - StorageWorks SAN Switch 2/8V Release Note

Documentation updates

This section provides information on last-minute additions and corrections to 4.x documentation.
HP StorageWorks Fabric OS 4.x command reference guide,
part number: AA-RVHVA-TE
The following lists changes to the
example, the following commands are not supported in Fabric OS 4.4.x:
•
diagEsdPorts
•
diagModePr
•
diagSilkworm
•
numSwitchSet
•
numSwitchShow
•
portCfgMcastLoopback
•
tsHelp
On page 112:
Remove the reference to "fabric.ops.mode.vcEncode: 0" from the configShow output in the
Example section.
On page 639:
The supportSave command was modified in this release, as follows:
supportSave
Under the supportSave command, in the "Description" section, replace the following text:
"RASLOG
TRACE
supportSave
With this text:
"RASLOG
TRACE
supportShow
HP StorageWorks Fabric OS 4.x command reference guide
switchname-slot-YYYYMMDDHHMM-errDumpAll.ss
switchname-slot-YYYYMMDDHHMM-tracedump.dmp
switchname-slot-YYYYMMDDHHMM-supportShow (saved in the specified
remote directory)"
chassisname-slot-YYYYMMDDHHMM-errDumpAll.ss
chassisname-slot-YYYYMMDDHHMM-tracedump.dmp
chassisname-slot-YYYYMMDDHHMM-supportShow (saved in the specified
remote directory)"
Fabric OS 4.4.0f release notes
. For
25