HP AA979A - StorageWorks SAN Switch 2/8V Release Note page 23

Table 6 Fabric OS area information (continued)
Fabric OS Area
Security: SLAP fail
counter and two
switches
Security: SSH login
Support
Trace dump
Trunking
Upgrading to Fabric OS
4.4.0b
Description
The SLAP counter is designed to work when all the switches in the fabric are
in secure mode. All the switches in the fabric must be in secure mode for
accurate SLAP statistics.
To properly connect SSH login, wait for secure mode to complete before
rebooting or performing HA failover on the Core Switch 2/64 or SAN
Director 2/128. If secure mode is enabled and a reboot occurs before
secure mode completes, SSH login will not connect and will go to the wrong
MAC address because the active CP changes after an HA failover.
Fabric OS 4.4.0b users should run the supportSave command instead
of, or in addition to, the supportShow command. Doing so gathers
additional switch details and sends by FTP all files to a customer server.
HP StorageWorks Fabric OS 4.x procedures user guide
Refer to the
instructions on setting up FTP services.
Fabric OS 4.4.0b users should set up automatic FTP trace dump transfers to
customer FTP servers. Doing so will minimize trace dump overwrites. Refer
HP StorageWorks Fabric OS 4.x procedures user guide
to the
instructions on setting up FTP services.
You can disable or enable trunking using the switchCfgTrunk or
portCfgTrunk commands. When the command is executed to update the
trunking configuration, the ports for which the configuration applies are
disabled and reenabled with the new trunking configuration (as a result,
traffic through those ports could be disrupted.)
Recommended upgrade procedures to Fabric OS 4.4.0b include the
following:
Before loading version 4.4.0b:
• Run configupload to create a backup configuration, if the user wants
to return to version 4.2.x.
• Run supportShow to capture the previous error logs in version 4.2.x.
• Run chassisName to change the default factory configuration to a
more meaningful name.
After loading Fabric OS 4.4.0b, see "Logging, supportFTP," earlier in this
table.
for
for
Fabric OS 4.4.0f release notes 23