On page 136, Table 19, "Core Switch 2/64 and SAN Director 2/128 system specifications,"
replace the following table entry:
"Switch latency <2.1 µsec any port to any port at 2 Gb/sec, cut-through routing"
With this table entry:
"Switch latency 2.05 < 2.35 µsec any port to any port at 2 Gbit/sec, cut-through routing"
On page 56, under the heading "Configure IP Addresses for CP Cards," remove the first sentence
in the Note:
Use a block of three IP addresses that are consecutively numbered in the last octet. The IP and
gateway addresses must reside on the same subnet.
36
Core Switch 2/64 and SAN Director 2/128 installation guide, part number: AA-RVUSC-TE