Zoning Telnet Commands; Overview - HP AA979A - StorageWorks SAN Switch 2/8V User Manual

Zoning Telnet Commands

Overview

To use a telnet command, log in with administrative privileges to any switch in the
fabric, enter the command with required operands, if any, and then press the Enter
key. Changes made to the zoning configuration on one switch are replicated to all
switches in the fabric.
Note:
Web Tools) it is possible that a change resulting from one connection may not transfer
to another connection. It is also possible that a change from one connection will
over-write a change from another connection. Therefore, use care when making
changes using simultaneous sessions.
Table 2
Table 2: Zoning Telnet Commands
Zone Alias
aliAdd
aliCreate
aliDelete
aliRemove
aliShow
Zoning
zoneAdd
zoneCreate
HP StorageWorks Zoning Version 2.6.1 User Guide
When accessing the switch using simultaneous multiple connections (telnet or
contains the telnet commands that administer zoning.
Command
Add a member to a zone alias.
Create a zone alias.
Delete a zone alias.
Remove a member from a zone alias.
Show zone alias definition.
Add a member to a zone.
Create a zone.
Description
B
39