Qloopremove - HP AA979A - StorageWorks SAN Switch 2/8V User Manual

Zoning Telnet Commands

qloopRemove

Function
Remove one or more members from a QuickLoop.
Synopsis
qloopRemove qloopName, qloopMemberList
Availability
Administrator
Description
The member list is identified through an exact string match; therefore, when
removing multiple members, order is important. For example, if a QuickLoop
contains wwn2; wwn3; wwn4, removing wwn3; wwn4 succeeds, but removing
wwn4; wwn3 fails.
If all members are removed, the QuickLoop is deleted.
When a configuration is enabled, all QuickLoops defined in the configuration
must resolve to one or two switch World Wide Names.
Operands
The following operands are required:
qloopName
qloopMemberList
Example
Remove member wwn2 from qlp1:
sw5:admin> qloopRemove "qlp1", "wwn2"
64
Name of QuickLoop, in quotes.
List of QuickLoop members to be removed, in quotes,
separated by semicolons. Can be one or more of the
following:
– World Wide Names
– Zone alias names
HP StorageWorks Zoning Version 2.6.1 User Guide