Installing Zoning
A zoning license can be installed with either of the two procedures in this chapter.
Installing Zoning with Telnet Commands
To install zoning using telnet commands, execute the following procedure:
1. Log on to the switch by telnet using an account that has administrator
2. On the command line, enter:
3. Enter the following on the command line to verify that the license has been
HP StorageWorks Zoning Version 2.6.1 User Guide
privileges. For details, refer to the user's guide provided with the hardware.
licenseAdd "key"
where "key" is the license key within double quotes.
Note:
The license key must be entered exactly as given; it is case sensitive.
activated:
licenseShow
Example:
admin> licenseShow
9S9RzSebeATAS0k:
Fabric Watch license
Web license
Zoning license
2
15