Cfgsize - HP AA979A - StorageWorks SAN Switch 2/8V User Manual

Zoning Telnet Commands
cfgRemove
cfgSave

cfgSize

Function
Display the size details of the zone database.
Note:
running 3.1.x and/or 4.1.x), the cfgSize (maximum) from the 2.6.1, 1 Gb switches
should be the maxumum for the mixed fabric. This is because all switches have to be
able to hold the zoning configuration, so the maximum size becomes the size available
in the switch with the least amount of memory, which is the 2.6.1 switch.
Synopsis
cfgsize [integer]
Availability
All users.
Description
This command with no parameters (or parameter 0) displays the size details of the
zone database. The size details include the following (all sizes are in bytes):
If a nonzero integer is specified as the parameter, the size of the flash memory
allocated for the zone database is displayed. The zone database includes both the
Defined and Effective configurations. This size is in kilobytes.
58
If you are running a 2.6.1 switch (1 Gb) and have a mixed fabric (switches
Zone database maximum size—this is the upper limit for the Defined
configuration, determined by the amount of flash memory available to store
the Defined configuration. This is smaller than the flash memory size because
it stores additional information about the database.
The committed size—this is the size of the Defined configuration currently
stored in flash memory.
The transaction size—this is the size of the uncommitted Defined
configuration. This value is nonzero if the Defined configuration is being
modified by telnet, API, etc. Otherwise, it is 0.
HP StorageWorks Zoning Version 2.6.1 User Guide