Zonecreate - HP AA979A - StorageWorks SAN Switch 2/8V User Manual

Example
Add aliases for three disk arrays to Blue_zone:
sw5:admin> zoneAdd "Blue_Zone", "array3; array4; array5"
See Also

zoneCreate

zoneDelete
zoneRemove
zoneShow
zoneCreate
Function
Create a zone.
Synopsis
zoneCreate zoneName, zoneMemberList
Availability
Administrator
Description
A zone name is a C-style name beginning with a letter and followed by any
number of letters, numerals, and underscores. Names are case sensitive; for
example, Zone_1 indicates a different zone than zone_1. Blank spaces are ignored.
The zone member list must have at least one member; empty lists are not allowed.
The members are described by a list of member definitions separated by
semicolons.
Specify a physical fabric port number as a pair of decimal numbers s, p where s is
the switch number (domain ID) and p is the port number on that switch. For
example, "2,12" specifies port 12 on switch number 2. When a zone member is
specified by physical fabric port number, then all devices connected to that port
are in the zone. If this port is an arbitrated loop, then all devices on the loop are in
the zone.
HP StorageWorks Zoning Version 2.6.1 User Guide
zoneCreate
67