Web Tools Functionality Moved To Dcfm - HP A7533A - Brocade 4Gb SAN Switch Base Release Note

• High availability failover and user notification occur on the 4/256 SAN Director when there is a
failed Ethernet chip (Oscillator chip).
• Advanced Zoning with Web Tools licenses are no longer necessary, starting wit Fabric OS 6.1.x.
These features are automatically enabled on all products running Fabric OS 6.1.x or later.

Web Tools functionality Moved to DCFM

The functionality that was moved from Web tools in 6.1.1 to DCFM is applicable to both DCFM
Professional and DCFM Enterprise.
Table 9 Web Tools functionality in DCFM
Function
Add unzoned devices
Analyze zone config
Define device alias
Device accessibility matrix
Fabric events
Fabric summary
22
Table 9 specifies these changes.
Web Tools 6.1.0
Zone Admin
Zone Admin
Zone Admin
Zone Admin
Monitor > Fabric events
Reports > Fabric summary
DCFM
Configure > Zoning
Reverse Find in the zoning dialog
provides the view of the zoned
and unzoned devices in the fabric
is all zone memers are selected
for Find.
Configure > Zoning:
Reverse Find in the zoning dialog
provides the view of the zoned
and unzoned devices in the fabric
if all zone members are selected
for Find.
Device Tree and Topology:
Connected End Devices: Custom
display from the top level in the
main frame provides the device
tree and topology view for all the
zoned devices if all zones are
selected in the active zone
configuration.
Configure > Zoning
Configure > Zoning
The Compare dialog provides the
Storage-Host and Host-Storage
view in a tree representation that
is comparable to the Device
Accessibility Matrix when all
devices are selected.
Monitor > Logs > Events
Monitor > Reports > Fabric
Summary report
Comments