HP A7533A - Brocade 4Gb SAN Switch Base Release Note page 13

6
Not supported in Fabric OS 6.0 and later.
7
Mode 3 qualified only with M-EOS switches.
8
Not on FCR.
9
Supported locally only within the Fabric OS switch.
NOTE:
FICON Cascaded CUP is qualified only on select platforms.
Prerequisites
Table 2 lists the supported Fabric OS firmware versions. HP recommends using the latest supported
firmware release versions to get the greatest benefit from the SAN.
For a list of retired products, see the HP website:
http://www.hp.com
IMPORTANT:
The Fabric OS versions listed in the Earliest compatible version column in
versions supported by HP at the time of the Fabric OS 6.1.1b release.
HP StorageWorks Fabric OS 6.1.1b release notes
Table 2 are the earliest
13