5. From the rear of the server, remove the two screws at each side of the power
6. Gently pull the power supply cage from the server, making sure the cables do
Center-fan and adapter-support bracket
Note:
When working with some options, you must first remove the center-fan and or
adapter-support bracket to access certain components or connectors on the system
board.
Note: The adapter-support bracket is attached to the center-fan bracket. Both
supply cage.
not snag on the chassis or system board.
Note: You might need to insert the blade of a screwdriver behind one corner of
the power supply cage to begin moving it.
v Read "Installation guidelines" on page 11.
v Read Appendix B, "Safety information," on page 153.
v Read "Handling static-sensitive devices" on page 12.
brackets can be removed and installed together as a single unit or
individually. See "Center-fan support bracket (dual fan guide)" on page 69 or
"Adapter-support bracket" on page 70 for instructions on how to remove
these support brackets separately.
Chapter 4. Service replaceable units
67