Canon iP6700D - PIXMA Color Inkjet Printer Printing Manual page 66

Possible Cause
A large quantity of plain paper is
loaded in the Auto Sheet Feeder
The inner cover is open
If the printed surface is still scratched
Follow the procedure below and set the Prevent paper abrasion
procedure also applies to direct printing from your camera.
1. Press the Menu
2. Use the
button.
3. Use the
4. Use the
5. Use the
button.
6. Use the
* After printing is completed, return the Prevent paper abrasion
64
Depending on the environment in which it is used (high temperature/high
humidity/low temperature/low humidity), some types of plain paper may not feed
correctly.
If this happens, reduce the number of pages loaded to about the half the
recommended maximum (stack approx. 5 mm or 0.2 inches high).
Close the inner cover completely. Paper does not feed properly if the inner cover is
even slightly open.
Menu button. Menu Menu
buttons to select Maintenance/settings
buttons to select Device Settings
buttons to select Print settings
buttons to select Prevent paper abrasion
buttons to ON ON and then press the OK
ON ON
Try This
Prevent paper abrasion to ON
Prevent paper abrasion Prevent paper abrasion
Maintenance/settings and then press the OK
Maintenance/settings Maintenance/settings
Device Settings and then press the OK
Device Settings Device Settings
Print settings and then press the OK
Print settings Print settings
Prevent paper abrasion and then press the OK Prevent paper abrasion Prevent paper abrasion
OK button.
OK OK
Prevent paper abrasion to OFF Prevent paper abrasion Prevent paper abrasion
ON. This
ON ON
OK
OK OK
OK button.
OK OK
OK button.
OK OK
OK OK OK
OFF OFF. OFF