Canon iP6700D - PIXMA Color Inkjet Printer Printing Manual page 53

6
Install the ink tank.
(1) Insert the ink tank in the print head holder.
(2) Press on the
(3) Ensure that the ink tank lamp lights red.
7
Close the inner cover and the cover.
The print head holder moves to the right. The ink tank installation process is now
complete.
mark until the ink tank snaps firmly into place.
Ensure that the ink tanks are installed in the order directed by the
label. The printer cannot be used unless all the ink tanks are
installed.
Ensure that the inner cover is closed. Printing will not occur if the
inner cover is open.
The Alarm Alarm lamp still lights after the cover is closed if an ink tank is
Alarm Alarm
not installed properly. Open the cover and make sure that all the ink
tanks are installed in the correct order directed on the label.
To maintain optimal print quality, use an ink tank within six months
of its first use.
Once an ink tank has been used, do not remove it from the printer
and leave it out in the open. This will cause the ink tank to dry out
and the printer may not operate properly when it is reinstalled.
Color ink consumption may occur even when black-and-white or
grayscale printing is specified.
Color ink is consumed in the head cleaning and deep cleaning,
which are necessary to maintain the printer.
When you start printing after replacing the ink tank, the printer
executes print head cleaning automatically. Do not perform any
other operations until the print head cleaning finishes.
The lamp lights red.
51