Setup Menu - Yamaha pdm-4210 User Manual

OPERATING INSTRUCTIONS (continued)

SETUP MENU

Picture
Audio
Timer
MENU
Function
Setup
Language
Select
OK Set
Selected characters
Auto Adjust*
Moves the horizontal position
to left.
Horizontal Position
Moves down the vertical
position.
Vertical Position
Reduces the dot clock
frequency (shrinks the right
side).
Horizontal Clock
Slows the dot clock phase
(shifts slightly to left).
Clock Phase
Reset
Input Level
Frequency Display
WVGA Type
Vertical Filter
Frequency Mode
RGB1
RGB2
* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.
OK
(Menu) (Adjust)
Press the OK button to start
automatic regulation.
Moves the horizontal position
to right.
Moves up the vertical position.
Increases the dot clock
frequency (expands the right
side).
Advances the dot clock phase
(shifts slightly to right).
(Selects the Reset mode)
0.7V 1.0V
Off On
Off On
Off On
Movie PC
Setup
Auto Adjust Adjust
Horizontal Position 0
Vertical Position + 31
Horizontal Clock – 20
Clock Phase 10
Reset Reset
Select Return Exit
Setup
Auto Adjust Adjust
Horizontal Position 0
Vertical Position + 31
Horizontal Clock – 20
Clock Phase 10
Reset Reset
Select Return Exit
Setup
Input Level 0.7V
Frequency Display Off
WVGA Type Off
Vertical Filter On
Frequency Mode Movie
RGB1 DVI-PC
RGB2 RGB
Select Set Return
Horizontal Position, Vertical Position, Horizontal Clock and Clock
Phase are adjusted automatically.
Adjust the left-side display position.
(This function is only for RGB2. It is not available (grayed out) for
RGB1.)
Adjust the vertical display position.
(This function is only for RGB2. It is not available (grayed out) for
RGB1.)
Adjust for maximum character clarity.
(This function is only for RGB2. It is not available (grayed out) for
RGB1.)
Adjust for clear character visibility.
(This function is only for RGB2. It is not available (grayed out) for
RGB1.)
The original factory settings for the items of this Menu page can be
restored by pressing the OK button. (This is effective only for RGB2.)
Normally set to 0.7 V. If white is found to spread across the screen,
set to 1.0 V. (This is effective only for RGB2.)
Set this to Off if the frequency information of the Input Signal Screen
Display is not required.
This is only available for W-VGA signal.
When it is set to On, the display area mode can be selected Full or
Real.
Turn On when concerned about screen flicker.
Set to Movie when viewing moving images on a personal computer.
Optional (grayed out)
Optional (grayed out)
OK
Horizontal Position 0
Next / Prev Adjust
OK
Clock Phase 10
Next / Prev Adjust
Setup hint
Return
Return
21