Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
•
54 Mbps Wireless PC Card Model WG511
•
54 Mbps Wireless PCI Card Model WG311
•
54 Mbps Wireless USB 2.0 Adapter Model WG121
•
ProSafe™ Indoor 5 dBi Omni-directional Antenna Model ANT24O5
•
ProSafe™ Indoor/Outdoor 18 dBi Patch Panel Directional Antenna Model ANT24D18
•
ProSafe™ Indoor/Outdoor 9 dBi Omni-directional Antenna Model ANT2409
•
Low-loss Antenna Cables
Package Contents
The product package should contain the following items:
•
ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2.
•
AC power adapter.
•
Category 5 (Cat 5) Ethernet cable.
•
FWG114P Installation Guide (201-10301-01).
•
Resource CD for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
(SW-10023-03), including:
— This manual.
— Application Notes and other helpful information.
•
Registration and Warranty Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the router for repair.
The FWG114P v2 Front Panel
The front panel of the FWG114P v2 contains the status LEDs. Use the LEDs to verify various
operations. Viewed from left to right,
ProSafe 802.11g Wireless Firewall/Print Server
Broadband
ACT
PWR
TEST
ALERT
P R IN TER
Figure 2-1: FWG114P v2 Front Panel
Introduction
Table 2-1
ACT
100
1
2
3
4
LINK
LNK/ACT
M O DEM
IN TER N ET
LO CA L
201-10301-02, May 2005
describes the LEDs on the front of the router.
MODEL
FWG114P
100
LNK/ACT
W LA N
2-7