Basic Requirements For Dial-In; How To Configure Dial-In - NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual
Wireless 802.11g firewall/print server
Hide thumbs
Also See for FWG114Pv2 - Wireless Firewall With USB Print Server:
- Specifications (2 pages) ,
- Installation manual (2 pages) ,
- Introduction manual (11 pages)
Table of Contents
Advertisement
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
Basic Requirements for Dial-in
Dial-in requires these elements:
A broadband connection to the FWG114P v2.
1.
An analog phone line.
2.
A serial modem properly configured and attached to the DB9 connector on the serial port.
3.
The Dial-in settings configured and applied to the FWG114P v2.
4.
How to Configure Dial-in
Follow the steps below to configure a serial port dial-in connection.
Configure a serial port modem according to the instructions above.
1.
From the Serial Port section of the main menu, click Dial-in.
2.
Figure 5-3: Serial Port Dial-in settings screen
Configure the Dial-in settings.
3.
Click Apply for the changes to take effect.
4.
Serial Port Configuration
201-10301-02, May 2005M-10207-01, Reference Manual v2
5-5
Advertisement
Table of Contents
Troubleshooting
