Windows Printer Port Management - NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
In the LPR Printer Selection box, click Change...
6.
In the Printer Address field, type the name or IP address of the FWG114P v2 Wireless
7.
Firewall/Print Server.
The IP address will usually be 192.168.0.1.
You can leave the Queue Name blank.
Click Verify to make sure your computer can see the printer.
You should see the IP address displayed above the button. If no IP Address appears, check that
you have correctly typed the queue name or IP Address.
Click OK to return to the Untitled 1 window.
At the bottom of the Untitled 1 dialog box, click Create....
8.
When prompted, rename the printer with a descriptive name and click Save.
A printer icon should now appear on your desktop.
Quit the Desktop Printer Utility.
9.

Windows Printer Port Management

• Print jobs can be managed from Windows. Open the Printers folder (Start -> Settings ->
Printers) and double-click any printer to see the current print jobs.
• To delete a port created by this setup program, use the Windows Delete Port facility:
Right-click any printer in the Printers folder, and select Properties.
a.
Highlight the port you want to delete.
b.
Use the Delete Port button to delete the port. This button is on either the Details or Ports
c.
tab, depending on your version of Windows.
• If you change the printer attached to the FWG114P v2, run the Add Port program again and
select the new printer.
The options for the Print Port Driver are accessed via the Windows Port Settings button.
Use Start -> Settings -> Printers to open the Printers folder, then right-click the Printer and select
Properties. The Port Settings button is on either the Details or Port tab, depending on your version
of Windows. An example screen is shown below:
7-10
201-10301-02, May 2005
Print Server