Vpn Policy Configuration For Manual Key Exchange - NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
Table 8-1. VPN Auto Policy Configuration Fields
Field
Enable Encryption
Encryption
Algorithm
Enable Authentication
Authentication
Algorithm
NETBIOS Enable

VPN Policy Configuration for Manual Key Exchange

With Manual Key Management, you will not use an IKE policy. You must manually type in all the
required key information. Click the VPN Policies link from the VPN section of the main menu to
display the menu shown below.
Virtual Private Networking
Description
Use this checkbox to enable or disable ESP Encryption.
If you enable ESP encryption, then select the encryption algorithm:
• DES is the default.
• 3DES is more secure.
Use this checkbox to enable or disable ESP transform for this VPN policy.
You can also select the ESP mode with this menu.
Two ESP modes are available:
• Plain ESP
• ESP with authentication
If you enable AH, then use this menu to select which authentication
algorithm will be employed.
The choices are:
• MD5 is the default.
• SHA1 is more secure.
Check this if you wish NETBIOS traffic to be forwarded over the VPN
tunnel. The NETBIOS protocol is used by Microsoft Networking for such
features as Network Neighborhood.
201-10301-02, May 2005
8-9