NETGEAR GS748Tv4 Software Administration Manual page 202

The following table describes the detailed port information displayed on the screen. To view
information about a different port, select the port number from the Interface menu.
Field
Interface
MST ID
ifIndex
Port Type
Port Channel ID
Port Role
202 | Chapter 6: Monitoring the System
GS748T Smart Switch Software Administration Manual
Description
Use the drop down menu to select the interface for which data is to be
displayed or configured.
Displays the created or existing MSTs.
This field indicates the ifIndex of the interface table entry associated with this
port on an adapter.
For most ports this field is blank. Otherwise the possible values are:
:
•
Mirrored Indicates that the port has been configured as a monitoring port
and is the source port in a port mirroring session. For additional
information about port monitoring and probe ports, see
Mirroring
on page 219.
:
•
Probe Indicates that the port has been configured as a monitoring port
and is the destination port in a port mirroring session. For additional
information about port monitoring and probe ports, see
Mirroring
on page 219.
• Port Channel: Indicates that the port has been configured as a member
of a port-channel, which is also known as a link Aggregation Group (LAG).
If the port is a member of a port channel, the port channel's interface ID and
name are shown. Otherwise, Disable is shown.
Each MST Bridge Port that is enabled is assigned a Port Role for each
spanning tree. The port role will be one of the following values: Root Port,
Designated Port, Alternate Port, Backup Port, Master Port, or Disabled Port.
Multiple Port
Multiple Port