NETGEAR GS748Tv4 Software Administration Manual page 152

2. To modify settings for a RADIUS server that is already configured on the switch, select the
check box next to the server address, update the desired fields, and click Apply.
3. Click Refresh to update the page with the most current information.
4. To delete a configured RADIUS server, select the check box next to the server address, and
then click Delete.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
The following table describes the RADIUS server statistics available on the page.
Field
Server Address
Round Trip Time
Access Requests
Access Retransmissions
Access Accepts
Access Rejects
Access Challenges
Malformed Access
Responses
Bad Authenticators
Pending Requests
Timeouts
Unknown Types
Packets Dropped
Use the buttons at the bottom of the page to perform the following actions:
152 | Chapter 5: Managing Device Security
GS748T Smart Switch Software Administration Manual
Description
This displays all configured RADIUS servers.
The time interval, in hundredths of a second, between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it
from this RADIUS authentication server.
The number of RADIUS Access-Request packets sent to this server. This
number does not include retransmissions.
The number of RADIUS Access-Request packets retransmitted to this
server.
The number of RADIUS Access-Accept packets, including both valid and
invalid packets, that were received from this server.
The number of RADIUS Access-Reject packets, including both valid and
invalid packets, that were received from this server.
The number of RADIUS Access-Challenge packets, including both valid and
invalid packets, that were received from this server.
The number of malformed RADIUS Access-Response packets received
from this server. Malformed packets include packets with an invalid length.
Bad authenticators or signature attributes or unknown types are not included
as malformed access-responses.
The number of RADIUS Access-Response packets containing invalid
authenticators or signature attributes received from this server.
The number of RADIUS Access-Request packets destined for this server
that have not yet timed out or received a response.
The number of authentication timeouts to this server.
The number of RADIUS packets of unknown type which were received from
this server on the authentication port.
The number of RADIUS packets received from this server on the
authentication port and dropped for some other reason.