File Management; Active Image - NETGEAR GS724TPS - ProSafe - Gigabit Stackable PoE Smart Switch Software Administration Manual

GS700TPS Smart Switch Software Administration Manual
2. Select Firmware, Boot File or Configuration as the download File Type from the provided
field.
3. Select whether to download via TFTP or via HTTP.
4. If you selected via HTTP, enter the file name in the provided box.
5. If you selected via TFTP, enter the TFTP Server IP address in the provided field.
6. If you selected via TFTP, enter the Remote Filename in the provided field.
7. Click APPLY to download the file. You must reboot the device for the downloaded file
settings to take effect. See

File Management

The File Management menu contains the following option:
•

"Active Image"

Active Image
The Active Image screen enables the user to select which image will be set as active after the next
reset. The Active Image file for each unit in a stacking configuration can be individually selected.
To define the active image:
1. Click Maintenance > File Management > Active Image. The Active Image screen displays:
Figure 8-5
The Active Image screen contains the following fields:
• Active Image – Displays the image file which is currently active on the unit.
Maintenance
"Device Reboot" for detailed instructions on rebooting the device.
v1.0, June 2009
8-6