GS700TPS Smart Switch Software Administration Manual
To bind interfaces to an ACL:
1.
Click Security > ACL > MAC Binding Configuration. The MAC Binding Configuration
screen displays:
Figure 6-14
The MAC Binding Configuration screen contains the following fields:
MAC Binding Configuration
•
ACL Name – Select the ACL Name for viewing and modifying ACL bound interfaces.
Port Selection Table
•
Select the interfaces for which the ACLs are bound.
2. Select the interfaces to which the ACLs are bound.
3. Select the ACL Name from the list in the provided field.
4. Select the interfaces to bind to the selected ACL Name by one of the following methods.
a. Click on the or LAG's gold bar to display the associated interfaces, and then select the
interfaces to bind by clicking on the boxes below the interfaces.
or
b. Click on the Unit's or LAG's quick box to select all the associated interfaces.
5. Click APPLY to update the device.
IPv4 ACL
The IPv4 ACL screen allows an IPv4 Based ACL to be defined.
6-25
v1.0, June 2009
Managing Security