Printing Using The Dpof Settings; Disconnecting The Camera From The Printer - Pentax Optio A30 Operating Manual

Printing Using the DPOF Settings

1
Use the four-way controller (23) to select
[DPOF setting].
2
Press the OK button.
The DPOF setting screen appears.
Use the four-way controller (45) to check
the images and the print settings.
3
Confirm the number of copies, the
setting of the date, and the print
setting, and then start printing.
To set the number of copies and the date imprint, refer to "Setting the
Printing Service (DPOF)" (p.134). To print the images, refer to Steps 4
to 11 on "Printing Single Images" (pages 138 to 139).

Disconnecting the Camera from the Printer

Disconnect the camera from the printer when you have finished printing.
6
1
Turn the camera off.
2
Disconnect the USB cable from the camera.
3
Disconnect the USB cable from the printer.
If you disconnect the USB cable from the camera before you turn the
camera off, the camera returns to Playback mode.
Downloaded From camera-usermanual.com Pentax Manuals
140
100-0010 100-0010 100-0010
Print with DPOF setting Print with DPOF setting Print with DPOF setting
5 5 Date Date Date
Copies Copies Copies
10 10 10
Total Total Total
Cancel Cancel Cancel
MENU OK
Print Print Print