Setting The Alarm - Pentax Optio Optio WG-1 Operating Manual

13
Change the time in the same way as in steps 8 to 12.
If you selected [12h] in step 7, the setting switches between am and
pm corresponding to the time.
14
Press the four-way controller
(3) to select [Settings
complete].
15
Press the 4 button.
The date and time settings are saved and the screen returns to the
[W Setting] menu.
When you press the 4 button in step 15, the camera clock is reset to
00 seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.

Setting the Alarm

You can set the alarm to ring at a specified time.
You can choose whether the alarm will ring at the same time every day
or only once at the set time.
Setting the Alarm
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Alarm].
Date Adjustment
mm/dd/yy 24h
Date Format
Date 01/01/2011
Time 00:00
Settings complete
MENU Cancel OK OK
7
235