System Fan - HP dx7510 - Microtower PC Service & Reference Manual

System Fan

1. Prepare the computer for disassembly
2. Remove the access panel
3. Lay the computer on its side with the rear facing toward you.
4. Disconnect the cable that connects the system fan to the system board.
5. Remove the four Phillips screws that secure the fan to the chassis, rotate the top of the fan forward,
and then remove the fan from the chassis.
To install the fan, reverse the removal procedures.
(Preparation for Disassembly on page
(Access Panel on page 33).
32).
System Fan 63