Wireless Mini-Card; Removing The Wireless Mini-Card - Dell Inspiron One 2330 Owner's Manual

Wireless Mini-Card

WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
NOTE:
Dell does not guarantee compatibility or provide support for Mini-Cards
from sources other than Dell.
If you ordered a wireless Mini-Card with your computer, the card is
already installed.
Your computer has one half Mini-Card slot which supports a Wireless Local
Area Network (WLAN) + Bluetooth combo card.

Removing the Wireless Mini-Card

Prerequisites
1 Remove the stand. See "Removing the Stand" on page 19.
2 Remove the back cover. See "Removing the Back Cover" on page 23.
3 Remove the VESA-mount bracket.
See "Removing the VESA-Mount Bracket" on page 43.
4 Remove the system-board shield.
See "Removing the System-Board Shield" on page 49.
CAUTION:
When the Mini-Card is not in the computer, store it in protective
antistatic packaging. For more information, see "Protecting Against Electrostatic
Discharge" in the safety information that shipped with your computer.
Wireless Mini-Card
57