Replacing the Power-Supply Fan Bracket
Procedure
1 Align the screw hole on the power-supply fan bracket with the screw hole
on the chassis.
2 Replace the screw that secures the power-supply fan bracket to the chassis.
3 Connect the B-CAS card cable to the connector on the B-CAS card.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 24.
2 Replace the stand. See "Replacing the Stand" on page 21.
3 Follow the instructions in "After Working Inside Your Computer" on page 13.
Power-Supply Fan Bracket
79