Replacing The I/O Board Shield - Dell Inspiron One 2330 Owner's Manual

Replacing the I/O Board Shield

Procedure
1 Connect the power-supply fan cable and infrared cable to the
system-board connectors.
2 Connect the antenna cable to the connector on the TV tuner card.
3 Slide the power port and the power-supply control board through the slot
on the I/O board shield.
4 Align the screw holes on the I/O board shield with the screw holes
on the chassis.
5 Replace the screws that secure the I/O board shield to the chassis.
6 Replace the screw that secures the power-supply control board to the
I/O board shield.
7 Replace the screws that secure the power port to the I/O board shield.
Postrequisites
1 Replace the I/O cover. See "Replacing the I/O Cover" on page 83.
2 Replace the B-CAS card. See "Replacing the B-CAS card" on page 27.
3 Replace the power-supply fan bracket.
See "Replacing the Power-Supply Fan Bracket" on page 79.
4 Replace the system-board shield.
See "Replacing the System-Board Shield" on page 51.
5 Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 44.
6 Replace the back cover. See "Replacing the Back Cover" on page 24.
7 Replace the stand. See "Replacing the Stand" on page 21.
8 Follow the instructions in "After Working Inside Your Computer" on page 13.
88
I/O Board Shield