Scan Led Indicator; Resetting The Mobile Computer; Windows Ce 5.0 Devices - Motorola MC9094-KUCHJERA6WR - MC9094-K - Win Mobile 6.1 Professional 624 MHz User Manual

Pick List Mode with Multiple Bar Codes in Aiming Pattern
Figure 2-32
Release the trigger.
4.
NOTE Imager decoding usually occurs instantaneously. The mobile computer repeats the steps required to take
a digital picture (image) of a poor or difficult bar code, as long as the trigger remains pulled.
Scanning Tips
Optimal scanning distance varies with bar code density and scanner optics.
Hold the scanner farther away for larger symbols.
•
Move the scanner closer for symbols with bars that are close together.
•
NOTE Scanning procedures depend on the application and mobile computer configuration. An application may
use different scanning procedures from the one listed above.

Scan LED Indicator

The Indicator LED bar on the mobile computer provides a visual indication of the scan status.
Scan LED Indicators
Table 2-15
LED Status
Off
Solid Red
Solid Green

Resetting the Mobile Computer

Windows CE 5.0 Devices

There are two reset functions, warm boot and cold boot. A warm boot restarts the mobile computer by closing
all running programs.
A cold boot also restarts the mobile computer, but erases all stored records and entries in RAM. Data saved in
flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the
factory default settings.
Perform a warm boot first. This restarts the mobile computer and saves all stored records and entries. If the
mobile computer still does not respond, perform a cold boot.
Indication
Not scanning.
Laser enabled, scanning/imaging in process.
Successful decode.
Operating the MC909X 2 - 53