Motorola MC9094-KUCHJERA6WR - MC9094-K - Win Mobile 6.1 Professional 624 MHz User Manual page 209

User guide
Table of Contents

Advertisement

Troubleshooting the Four Slot Ethernet Cradle (Continued)
Table 7-4
Symptom
Battery is not
Mobile computer
recharging.
removed from the
cradle too soon.
Battery is faulty.
Mobile computer is
not inserted correctly
into the cradle.
Warning Message - "!
This message occurs
Unable to obtain a
if a suspend/resume
server assigned IP
cycle is performed
address. Try again
and the mobile
later or enter an IP
computer radio is not
address in Network
associated (e.g. due
Settings."
to being out of range)
Four Slot Spare Battery Charger
Troubleshooting The Four Slot Spare Battery Charger
Table 7-5
Symptom
Possible Cause
Batteries not
Battery was removed
charging.
from the charger or
charger was unplugged
from AC power too
soon.
Battery is faulty.
Battery contacts not
connected to charger.
Cause
Replace the mobile computer into the cradle. It can take up to
four hours to recharge a completely depleted battery pack if
mobile computer is suspended or longer if the mobile computer
is on.
For Windows Mobile 5.0 devices, view battery status by tapping
>
Start
Settings
For Windows CE 5.0 devices, view battery status by tapping
>
Start
Settings
Verify that other batteries charge properly. If so, replace the
faulty battery.
Remove the mobile computer and reinsert it correctly. Verify
charging is active.
For Windows Mobile 5.0 devices, view battery status by tapping
>
Start
Settings
For Windows CE 5.0 devices, view battery status by tapping
>
Start
Settings
Tap OK to close the message. The mobile computer will obtain
address information and communicate through the Ethernet
cradle.
Ensure MSR is receiving power. Ensure mobile computer is
attached correctly. Confirm main battery is charging. If a mobile
computer battery is fully depleted, it can take up to four hours to
fully recharge a battery (if the mobile computer is off and longer if
the mobile computer is operating).
For Windows Mobile 5.0 devices, view battery status by tapping
>
Start
Settings
For Windows CE 5.0 devices, view battery status by tapping
>
>
Settings
Control Panel
Verify that other batteries charge properly. If so, replace the faulty
battery.
Verify that the battery is seated in the battery well correctly with the
contacts facing down.
Maintenance & Troubleshooting
Solution
>
tab >
icon.
System
Power
>
>
Control Panel
Power
>
tab >
icon.
System
Power
>
>
Control Panel
Power
Solution
>
tab >
icon.
System
Power
>
icon.
Power
7 - 9
icon.
icon.
Start

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents