Modem Module - Motorola MC9094-KUCHJERA6WR - MC9094-K - Win Mobile 6.1 Professional 624 MHz User Manual

POWER
READY or STANDBY or FAULT
(Green)
CHARGING
(Solid Yellow)
UBC Adapter LEDs
Figure 6-19
UBC Adapter Charge LED Status Indications
Table 6-3
LED
POWER Green
READY or Green
STANDBY or Flashing-Yellow
FAULT Yellow
CHARGING Yellow

Modem Module

This section describes how to setup and use the MDM9000 Modem Module.
Line In Port
Phone Port
Modem Module
Figure 6-20
The Modem Module enables data communication between the mobile computer and a host computer, remotely
through the phone lines, and synchronizes information between the mobile computer and a host computer.
The following items are required for a modem connection:
Telephone number, IP address and DNS/WINS address information from the dial-in server administrator
•
Dial-in account on the host system, including a user ID and password
•
(Flashing Yellow) (Solid Yellow)
Indication
Power is connected to the UBC Adapter.
Charging complete.
The battery was deeply discharged and is being trickle charged to bring the
voltage up to the operating level. After operating level voltage is achieved the
battery charges normally.
Charging error, check placement of mobile computer/spare battery.
Normal charge.
LEDs
Description
Serial Port
Accessories 6 - 19