5 - 18 MC909X User Guide
Muting a Call
During a call, the microphone can be muted so that the person on the line can be heard but cannot hear
conversation from the microphone. This is useful if the user is listening to the person on the line and there's
conversation or background noise on the user's end.
To mute or un-mute a call:
Answer or place a phone call.
1.
Once the call connects to the other party, the phone keypad displays the
Tap
. The Mute icon appears.
2.
Mute
Mute/Un-Mute Icon
Figure 5-26
The mobile computer enables you to hear the other party to whom you are speaking, but stops them from
hearing your voice. This is particularly useful on conference calls where you want to hear the discussion
but want to block out any background noise that may be present on your end of the line.
To resume speaking, tap
3.
Putting Calls on Hold
To put a call on hold:
Answer or place a phone call.
1.
Once the call connects to the other party, the phone keypad displays the
2.
Tap
. The call is placed on hold.
3.
Hold
To resume speaking, tap
4.
Using Speed Dial
To use speed dial:
Tap
>
1.
Start
Phone
From the Phone keypad, tap and hold the speed dial location number assigned to a contact. (To dial a
2.
one-digit speed dial location number, tap and hold the speed dial number. To dial a two-digit speed dial
location number, tap the first digit and then tap and hold the second digit.)
so that the other party can hear your voice.
UnMute
so that the other party may hear your voice.
UnHold
or press the green dot key on the mobile computer's keypad.
button.
Mute
Mute Icon
button.
Hold