Changing Default Settings - Epson C11C560111 - PLQ 20 B/W Dot-matrix Printer User Manual

Changing default settings

The following table shows the basic function of each button in the
default setting mode.
Button
F1/Eject
Offline
F2
Follow these steps to enter the default-setting mode and change
the printer's default settings:
Note:
Prepare an A4 size sheet of paper before entering the default setting
mode.
You need to load a new sheet of paper each time the printer ejects a
printed sheet from the front slot.
Always close the printer cover before printing. The printer does not
print when the printer cover is open.
1. Turn off the printer.
Caution:
c
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise you may damage the
printer.
2. Turn on the printer while holding the F1/Eject and F2 buttons
on the control panel.
Basic function
Selects the next menu parameter.
Selects the previous menu parameter.
Changes the value in the selected menu.
Changing your Printer's Settings
6
6
6
6
6
6
6
6
6
6
6
6
53