Printing A Self-Test - Epson C11C560111 - PLQ 20 B/W Dot-matrix Printer User Manual

Note:
When you press the Offline button at the first item selection of each
menu, the menu selection will also return to the main setup menu
selection.
9. After you finish the default setting, turn off the printer to exit
the default setting mode.

Printing a Self-Test

Running the printer's self-test helps you determine whether the
printer or the computer is causing the problem:
If the self-test results are satisfactory, the printer is working
properly and the problem probably results from your printer
driver settings, application settings, computer, or interface
cable. (Be sure to use a shielded interface cable.)
If the self-test does not print properly, there is a problem with
the printer. See "Problems and Solutions" on page 64 for
possible causes and solutions to the problem.
Note:
Prepare an A4 size sheet of paper before entering the self-test
printing mode.
Always close the printer cover before printing. The printer does not
print when the printer cover is open.
Follow these steps to perform a self-test:
1. Turn off the printer.
Caution:
c
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise you may damage the
printer.
Changing your Printer's Settings
6
6
6
6
6
6
6
6
6
6
6
6
55